Flywheel
Usage:
Remove And Install Flywheel
1. Fasten a hoist to tool (A). Install tool (A) to the flywheel.
2. Remove bolts (1) that hold the flywheel to the crankshaft. Remove flywheel (2). The weight is approximately 65 kg (145 lb.).
3. Remove gear (3) from the flywheel if necessary.
NOTE: The following steps are for installation of the flywheel.
4. Heat gear (3) to a maximum temperature of 315° C (600° F), and install it on flywheel (2) so the chamfer of the gear teeth will be toward the starter pinion when the flywheel is installed.
5. Fasten a hoist and tool (A) to flywheel (2), and put it in position on the dowel of the crankshaft.
6. Put clean engine oil on the threads of bolts (1) that hold the flywheel to the crankshaft and install the bolts.
Caterpillar Information System:
3406B (PEEC) DIESEL TRUCK ENGINE Oil Pan
3406B (PEEC) DIESEL TRUCK ENGINE Valve Guides
3406B (PEEC) DIESEL TRUCK ENGINE Bridge Dowels
3406B (PEEC) DIESEL TRUCK ENGINE Valve Seat Inserts
3406B (PEEC) DIESEL TRUCK ENGINE Valves
3406B (PEEC) DIESEL TRUCK ENGINE Spacer Plate
3406B (PEEC) DIESEL TRUCK ENGINE Cylinder Head Assembly
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Nozzles and Adapters
3406B (PEEC) DIESEL TRUCK ENGINE Valve Lifters
3406B (PEEC) DIESEL TRUCK ENGINE Rocker Shaft Assemblies
3406B (PEEC) DIESEL TRUCK ENGINE Rocker Shaft Assemblies And Push Rods
3406B (PEEC) DIESEL TRUCK ENGINE Air Compressor And Accessory Drive
3406B (PEEC) DIESEL TRUCK ENGINE Flywheel Housing
3406B (PEEC) DIESEL TRUCK ENGINE Oil Pump
3406B (PEEC) DIESEL TRUCK ENGINE Piston Cooling Tubes
3406B (PEEC) DIESEL TRUCK ENGINE Camshaft
3406B (PEEC) DIESEL TRUCK ENGINE Camshaft Bearings
3406B (PEEC) DIESEL TRUCK ENGINE Connecting Rod Bearings
3406B (PEEC) DIESEL TRUCK ENGINE Crankshaft Main Bearings
3406B (PEEC) DIESEL TRUCK ENGINE Crankshaft
3406B (PEEC) DIESEL TRUCK ENGINE Crankshaft Front Seal And Wear Sleeve
3406B (PEEC) DIESEL TRUCK ENGINE Crankshaft Rear Seal And Wear Sleeve
3406B (PEEC) DIESEL TRUCK ENGINE Cylinder Liners
3406B (PEEC) DIESEL TRUCK ENGINE Pistons And Connecting Rod Assemblies