Valve Seat Inserts
Usage:
Remove And Install Valve Seat Inserts
Start By:
a. remove valves
1. Use tooling (A) to remove the valve seat inserts from the cylinder head.
2. Clean and remove any burrs from the valve seat bores.
NOTE: For reconditioning information of the cylinder head, see Service Training Meeting Guide, Form No. SESV1202.
NOTE: The following steps are for the installation of the valve and inserts.
3. Lower the temperature of the new valve seat inserts. Use tooling (B), and install the new valve seat inserts in the cylinder head.
End By:
a. install valves
Caterpillar Information System:
3406B (PEEC) DIESEL TRUCK ENGINE Valves
3406B (PEEC) DIESEL TRUCK ENGINE Spacer Plate
3406B (PEEC) DIESEL TRUCK ENGINE Cylinder Head Assembly
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Nozzles and Adapters
3406B (PEEC) DIESEL TRUCK ENGINE Valve Lifters
3406B (PEEC) DIESEL TRUCK ENGINE Rocker Shaft Assemblies
3406B (PEEC) DIESEL TRUCK ENGINE Rocker Shaft Assemblies And Push Rods
3406B (PEEC) DIESEL TRUCK ENGINE Air Compressor And Accessory Drive
3406B (PEEC) DIESEL TRUCK ENGINE Timing Gears and Plate
3406B (PEEC) DIESEL TRUCK ENGINE Timing Gear Cover
3406B (PEEC) DIESEL TRUCK ENGINE Vibration Damper And Pulley
3406B (PEEC) DIESEL TRUCK ENGINE Engine Front Support
3406B (PEEC) DIESEL TRUCK ENGINE Bridge Dowels
3406B (PEEC) DIESEL TRUCK ENGINE Valve Guides
3406B (PEEC) DIESEL TRUCK ENGINE Oil Pan
3406B (PEEC) DIESEL TRUCK ENGINE Flywheel
3406B (PEEC) DIESEL TRUCK ENGINE Flywheel Housing
3406B (PEEC) DIESEL TRUCK ENGINE Oil Pump
3406B (PEEC) DIESEL TRUCK ENGINE Piston Cooling Tubes
3406B (PEEC) DIESEL TRUCK ENGINE Camshaft
3406B (PEEC) DIESEL TRUCK ENGINE Camshaft Bearings
3406B (PEEC) DIESEL TRUCK ENGINE Connecting Rod Bearings
3406B (PEEC) DIESEL TRUCK ENGINE Crankshaft Main Bearings
3406B (PEEC) DIESEL TRUCK ENGINE Crankshaft