2006/08/07 Caterpillar


A New Kit for the Cooling System Pressure Cap is Available {1353, 1354, 1382, 1392, 7405}

Usage:

3512 1LM
Engine: Commercial
  • 3500 and 3500B Family All
  • G3500 Family All
  • The new kit includes the pressure cap, a warning film, and instructions for installation of the film. The contents of the kit are listed in Table 1.

    Table 1
    Contents of the 294-9052 Radiator Cap Kit    
    Qty     Item    
    1     4N-3311 Pressure Cap    
    1     225-4256 Film    
    1     Special Instruction, REHS3001, "Installation of the 225-4256 Film"    



    Illustration 1g01235683

    225-4256 Film

    ------ WARNING! ------

    Pressurized System: Hot coolant can cause serious burns. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure.

    ----------------------

    Install the 225-4256 Film on a flat surface of the radiator or on the expansion tank near the cap. Make sure that the film will not be obstructed by any object.

    When you replace a 4N-3311 Pressure Cap, use the 294-9052 Radiator Cap Kit.

    Caterpillar Information System:

    Access Codes for the IQAN MDL System{7490, 7600} Access Codes for the IQAN MDL System{7490, 7600}
    14M and 16M Motor Graders Power Train Wheel and Mounting
    C18 Engines for Caterpillar Built Machines Coolant Level Sensor Circuit - Test
    RM-300 Reclaimer Mixer Machine Systems Suspension Bar (Mixing Chamber Linkage) - Remove and Install
    RM-300 Reclaimer Mixer Machine Systems Rubber Spring (Suspension Bar/Mixing Chamber Linkage) - Remove and Install
    RM-300 Reclaimer Mixer Machine Systems Position Sensor (Rear Steering) - Remove and Install
    120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 0573 - FMI 08
    120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 0573 - FMI 04
    120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 0573 - FMI 03
    2006/07/31 Orifices Are Available for a Worn Bore in the Pump Actuator {5070, 5078}
    420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Metering Pump (Steering)
    450E Backhoe Loader Engine Oil Level - Check
    CB-534D and CB-564D Asphalt Compactors Safety Messages - Arrangement II
    2006/10/09 The Lubrication to the Bearings has been Improved {3030, 3160}
    966H and 972H Wheel Loaders Drive Shaft Universal Joints - Lubricate
    120M, 12M, 140M and 160M Motor Graders Rear Axle
    120M, 12M, 140M and 160M Motor Graders Wheel Group
    450E Backhoe Loader Engine Oil Sample - Obtain
    2006/07/10 Special Instruction, REHS2251 , "A Procedure for Installing an Improved Variable Frequency Controller on Large Soil Compactors" is Now Available With an Electrical Schematic for the Variable Frequency Controller {5258}
    450E Backhoe Loader Engine Oil and Filter - Change
    120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 1407 - FMI 03
    246C, 256C, 262C and 272C Skid Steer Loaders Operation Information
    120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 1407 - FMI 05
    120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 1407 - FMI 06
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.