Torque Limiting Coupling - Install
Installation Procedure
- Install torque limiting coupling (1) and retaining nut (2). Tighten the retaining nut to a torque of 646 ± 34 N·m (476 ± 25 lb ft).
Show/hide table
 | |
| Illustration 1 | g01288170 |
End By: Install the rotor drive shaft. Refer to Disassembly and Assembly, "Rotor Drive Shaft - Install".
Caterpillar Information System:
RM-300 Reclaimer Mixer Machine Systems Torque Limiting Coupling - Remove
RM-300 Reclaimer Mixer Machine Systems Mixing Chamber - Install
RM-300 Reclaimer Mixer Machine Systems Mixing Chamber - Remove
RM-300 Reclaimer Mixer Machine Systems Oscillating and Steering Bar - Remove and Install
RM-300 Reclaimer Mixer Machine Systems Mixing Chamber Linkage - Remove and Install
RM-300 Reclaimer Mixer Machine Systems Hydraulic Cylinder (Rear Steering) - Remove and Install
14M and 16M Motor Graders Power Train Relief Valve - Drain (Clutch 7)
14M and 16M Motor Graders Power Train Relief Valve - Main Relief
14M and 16M Motor Graders Power Train Relief Valve - Transmission Gear Lube
Improvements to the Engine Compartment on Landfill Compactors{1000, 7000} Improvements to the Engine Compartment on Landfill Compactors{1000, 7000}
2006/07/10 Improved Grease Is Now Used in the Front Suspension Group {7200, 7201}
14M and 16M Motor Graders Power Train Modulating Valve (Transmission Hydraulic Control)
RM-300 Reclaimer Mixer Machine Systems Hydraulic Cylinder (Front Steering) - Remove and Install
793D Off-Highway Truck/Tractor Control Valve (Hoist) - Disassemble
793D Off-Highway Truck/Tractor Control Valve (Hoist) - Assemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train General Troubleshooting Information
2006/08/21 New High Efficiency Oil Filters are Now Available {1308}
3176C Engines for Caterpillar Built Machines Event Codes
2006/07/03 Retention Is Improved on the Bolts on the Hoist Cylinders {0649, 5102, 6068, 7562}
D6K Track-Type Tractor Machine Systems Control Manifold (Hydraulic Fan) - Disassemble
Starting and Charging Systems Starter Solenoid (Starter Two) Test Description
725, 730 and 730 EJECTOR Articulated Trucks Power Train Transfer Gear Lubrication System
D6K Track-Type Tractor Machine Systems Control Manifold (Hydraulic Fan) - Assemble
VIMS Retrofit Kit Installation {7601} VIMS Retrofit Kit Installation {7601}