Relief Valve - Main Relief
Show/hide table
 | |
| 图 1 | g02196596 |
(B) 弯头组件的角度 ... 45 ± 5 度
(1) 螺塞组件的扭矩 ... 17.0 ± 1.5 N·m (150.5 ± 13.3 lb in)
(2) 螺栓的扭矩 ... 28 ± 7 N·m (248 ± 62 lb in)
(3) 快速断路连接器组件的扭矩 ... 17.0 ± 1.5 N·m (150.5 ± 13.3 lb in)
(4) 弯头组件的扭矩 ... 14 ± 2 N·m (124 ± 18 lb in)
(5) 螺塞组件的扭矩 ... 35.0 ± 3.5 N·m (25.8 ± 2.6 lb ft)
(6) 174-7449 弹簧
- 在试验力下的长度 ... 102.22 mm (4.024 in)
- 试验力 ... 228.55 ± 11.43 N (51.38 ± 2.57 lb)
- 试验后的自由长度 ... 115.44 mm (4.545 in)
- 外径 ... 20.75 mm (0.817 in)
- 试验力 ... 228.55 ± 11.43 N (51.38 ± 2.57 lb)
Caterpillar Information System:
14M and 16M Motor Graders Power Train Relief Valve - Transmission Gear Lube
Improvements to the Engine Compartment on Landfill Compactors{1000, 7000} Improvements to the Engine Compartment on Landfill Compactors{1000, 7000}
2006/07/10 Improved Grease Is Now Used in the Front Suspension Group {7200, 7201}
14M and 16M Motor Graders Power Train Modulating Valve (Transmission Hydraulic Control)
3176C Engines for Caterpillar Built Machines CID 0545 FMI 05 Ether Start Relay open/short to +batt
14M and 16M Motor Graders Power Train Relief Valve (Cooler Bypass)
3176C Engines for Caterpillar Built Machines CID 0545 FMI 06 Ether Start Relay short to ground
3176C Engines for Caterpillar Built Machines CID 1600 FMI 05 Engine Fan Push Solenoid open circuit
3176C Engines for Caterpillar Built Machines CID 1600 FMI 06 Engine Fan Push Solenoid short to ground
3176C Engines for Caterpillar Built Machines CID 1599 FMI 06 Engine Fan Pull Solenoid short to ground
3176C Engines for Caterpillar Built Machines CID 1599 FMI 05 Engine Fan Pull Solenoid open circuit
Starting and Charging Systems Starter Solenoid Power Circuit (Starter Two) Test Description
14M and 16M Motor Graders Power Train Relief Valve - Drain (Clutch 7)
RM-300 Reclaimer Mixer Machine Systems Hydraulic Cylinder (Rear Steering) - Remove and Install
RM-300 Reclaimer Mixer Machine Systems Mixing Chamber Linkage - Remove and Install
RM-300 Reclaimer Mixer Machine Systems Oscillating and Steering Bar - Remove and Install
RM-300 Reclaimer Mixer Machine Systems Mixing Chamber - Remove
RM-300 Reclaimer Mixer Machine Systems Mixing Chamber - Install
RM-300 Reclaimer Mixer Machine Systems Torque Limiting Coupling - Remove
RM-300 Reclaimer Mixer Machine Systems Torque Limiting Coupling - Install
RM-300 Reclaimer Mixer Machine Systems Hydraulic Cylinder (Front Steering) - Remove and Install
793D Off-Highway Truck/Tractor Control Valve (Hoist) - Disassemble
793D Off-Highway Truck/Tractor Control Valve (Hoist) - Assemble
725, 730 and 730 EJECTOR Articulated Trucks Power Train General Troubleshooting Information