2006/05/01 Caterpillar

Paving Compactor:

All

Road Reclaimer/Soil Stabilizer:

All

Cold Planer:

All

Asphalt Paver:

All

Soil Compactor:

All

A new assembly procedure is now available for the knob, the push button switch, the block, and the contact block on all Paving Products.

Show/hide table



Illustration 1	g01263640
(1) Knob (2) Push Button Switch (3) Block (4) Contact Block

Show/hide table



Illustration 2	g01263644
(5) Screws (6) Screws

1. Assemble block (3) to operator switch (2) .

2. Install screws (5). Tighten screws to a torque of .6 N·m (5 lb in).

   Note: Screws (5) are part of block (3) .

   1. Apply two drops of 152-9155 Adhesive to screws (5) after screws (5) have been torqued.

      Note: If 152-9155 Adhesive is not available, Loctite 480 Adhesive or Loctite 380 Adhesive may be used.

3. Assemble block (3) to contact block (4) .

4. Install screws (6). Tighten screws (6) to a torque of .6 N·m (5 lb in).

   Note: Screws (6) are part of contact block (4) .

   1. Apply two drops of 152-9155 Adhesive to screws (6) after screws (6) have been torqued.

      Note: If 152-9155 Adhesive is not available, Loctite 480 Adhesive or Loctite 380 Adhesive may be used.

5. Install knob (1) on the brake switch.