Hydraulic Tank - Remove and Install
拆卸步骤
开始:
- 拆下油箱。 请参阅拆解和组装, "油箱(转子传动装置润滑)- 拆卸和安装"。
Show/hide table
滚热的油或液压油的压力会对人员造成伤害。 发动机停机之后,液压油的压力仍会保留在液压系统里。 对液压系统进行维修之前,如果不事先释放压力,可能会造成严重伤害。 卸下液压系统的部件或管路时,确保所有的作业机具都已降到地面上,而且液压油温度已冷。 只能在发动机停机,并且加注口盖冷却到可以用徒手触摸时才能卸下加注口盖。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修机器时,务必小心,确保用容器盛接流出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。 有关可提供予卡特彼勒机器的工具及适合于盛装油液的容器,请参阅专门出版物, NENG2500, "卡特彼勒工具及车间用品指南"。 根据当地法规处置所有液体。 |
注: 为便于安装,在所有管路、软管、导线和管子上做出识别标记。 插接好所有线路、软管和管路。 这将有助于防止液体泄漏和防止污染物进入系统。
- 将断路开关转到断开位置。
- 从液压油箱将液压油排入合适的容器以便保存或废弃这些液压油。 有关正确的步骤,请参阅操作和保养手册。
- 将软管组件 (1) 从液压油箱 (3) 上断开。
Show/hide table
图 1 | g01258244 |
- 将软管组件 (2) 从液压油箱 (3) 上断开。
- 将软管组件 (4) 从液压油箱 (3) 上断开。
- 将软管组件 (5) 从液压油箱 (3) 上断开。
- 将线束组件 (6) 从液压油箱 (3) 上断开。
- 将适当的起吊设备连接到液压油箱 (3) 上。 将液压油箱 (3) 从机器上拆下。 液压油箱 (3) 的重量约为 124 kg (275 lb)。
Show/hide table
图 2 | g01258279 |
安装步骤
- 将适当的起吊设备连接到液压油箱 (3) 上。 将液压油箱 (3) 安装到机器。 液压油箱 (3) 的重量约为 124 kg (275 lb)。
Show/hide table
图 3 | g01258279 |
- 将线束组件 (6) 连接到液压油箱 (3) 。
Show/hide table
图 4 | g01258244 |
- 将软管组件 (5) 连接到液压油箱 (3) 。
- 将软管组件 (4) 连接到液压油箱 (3) 。
- 将软管组件 (2) 连接到液压油箱 (3) 。
- 将软管组件 (1) 连接到液压油箱 (3) 。
- 用液压油加注液压油箱。 有关正确的步骤,请参阅操作和保养手册。
- 将断路开关转到接通位置。
End By: 安装油箱。 请参阅 拆解和组装, "油箱(转子传动装置润滑)- 拆卸和安装"。
Caterpillar Information System:
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Fuel Tank - Remove and Install
777F Off-Highway Truck Hydraulic System Relief Valve (Hoist Raise, Hoist Lower) - Test and Adjust
773F Off-Highway Truck and 775F Quarry Truck Hydraulic System Hoist Cylinder Performance - Test
770 and 772 Off-Highway Truck Hydraulic and Braking System Proportioning Solenoid (Hoist) - Test
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Chassis Electronic Control System MID 087 - CID 0177 - FMI 04
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Chassis Electronic Control System MID 087 - CID 0177 - FMI 03
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Chassis Electronic Control System MID 087 - CID 0826 - FMI 08
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Chassis Electronic Control System MID 087 - CID 0826 - FMI 04
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Chassis Electronic Control System MID 087 - CID 0826 - FMI 03
24M Motor Grader Hydraulic and Steering System Operational Checks
414E Backhoe Loader Before Operation
2006/04/10 A New Support is Now Used on Vibratory Compactors {1408}
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Oil Tank (Rotor Drive Lubrication) - Remove and Install
583T Pipelayer Engine Supplement Engine Trunnion - Remove and Install
24M Motor Grader Secondary Steering - Test
The Instructions for the Field Installation of the New 284-8547 Backhoe Lines Gp (Kit, Field Conversion){5057} The Instructions for the Field Installation of the New 284-8547 Backhoe Lines Gp (Kit, Field Conversion){5057}
120M and 12M Motor Graders Hydraulic and Steering System Introduction
C9.3 Tier 4 Final Engines Coolant Temperature Sensor
C27 and C32 Engines for Caterpillar Built Machines Engine Fan Control Solenoid Circuit - Test
M325D L MH and M325D MH Material Handlers Hydraulic System Solenoid Valve (Pump Control)
C7 PETROLEUM Petroleum Engine Vibration Damper and Pulley - Remove and Install
C9 Industrial Engines Jacket Water Heater
587T Pipelayer Power Train Location of Power Train Components
C9 Industrial Engines Jacket Water Heater