Visual Inspection
A visual inspection of the steering system and the components is the first step when you identify a problem.
Show/hide table
Personal injury or death can occur if personnel are trapped between the wheel and the frame. The steering system is hydraulically controlled and wheels can crush personnel during movement. Use caution when working between the wheels and the frame. If the wheels must be turned, ensure that all personnel are clear of the machine before any movement. |
Show/hide table
Do not check for leaks with your hands. Pin hole (very small) leaks can result in a high velocity oil stream that will be invisible close to the hose. This oil can penetrate the skin and cause personal injury. Use cardboard or paper to locate pin hole leaks. |
- Check all oil lines and connections for damage.
- Check the pump and connections for damage and leaks.
- Follow the pump lines to the tank and valves. Check the lines for damage and leaks.
- Check the oil tank for damage and leaks.
- Check the tank oil level.
- The sampling valve for the steering oil is located on the steering disable valve. This sampling valve can be accessed on the steering hydraulic tank.
Show/hide table
Illustration 1 | g01268155 |
Steering disable valve (1) Sampling port for steering oil |
- Remove the filter elements. Check for particles that were removed from the oil by the filter elements. A magnet will separate ferrous particles from nonferrous particles (piston rings, O-rings, or seals).
Caterpillar Information System:
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2200 - FMI 03
120M and 12M Motor Graders Hydraulic and Steering System Location Of Components
EquipmentManager User Guide Operation and Maintenance Manual
C9 Industrial Engines Rear Power Take-Off (RPTO)
C4.4 Industrial Engine Camshaft Bearings
C9 Industrial Engines Rear Power Take-Off (RPTO)
C4.4 Industrial Engine Engine Oil Cooler
EquipmentManager Dealer Administrator Manual Product Monitoring
C9 Industrial Engines Rear Power Take-Off (RPTO)
C4.4 Industrial Engine Engine Oil Filter Base
2006/03/20 Dowels for Servicing the Hub in the Differential Lock Are Available {3256, 3258}
2006/05/29 A Guard for the Fuel Level Sender Is Available {1273}
777F Off-Highway Truck Steering System Steering System Troubleshooting
2006/03/13 Service Tips for the Hydraulic Electronic Unit Injector HEUI Pump {1714}
583T Pipelayer Power Train Pump Drive Coupling - Remove and Install
C9.3 Industrial Engine Flywheel
777F Off-Highway Truck Hydraulic System Service Brake (Front Oil Cooled) - If Equipped
777F Off-Highway Truck Steering System Relief Valve (Primary Steering Backup) - Test and Adjust
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2200 - FMI 04
C9.3 Industrial Engine Flywheel Housing
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2200 - FMI 08
770 and 772 Off-Highway Truck Hydraulic and Braking System Pressure Switch (Parking Brake)
770 and 772 Off-Highway Truck Hydraulic and Braking System Pressure Switch (Service Brake, Retarder)
773F and 775F Off-Highway Truck Safety Messages