Drive Shaft (Upper) - Remove and Install
Start By:
- Install the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".
- Remove the two bolts and guard (1).
- Remove the four bolts and guard (2).
Show/hide table
Illustration 2 g01253082 - Remove bolt (3) and the clamp.
- Remove the two bolts and guard (4).
- Remove the four bolts and guard (5).
Show/hide table
Illustration 3 g01253083 - Attach a suitable lifting device to drive shaft (6). The weight of drive shaft (6) is approximately
20 kg (44 lb) . - Remove eight bolts (7) from drive shaft (6). Remove drive shaft (6).
Show/hide table
Illustration 1 | g01253079 |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Loctite 7649 Primer | 1 |
B | - | Loctite 271 Threadlocker | 1 |
- Attach a suitable lifting device to drive shaft (6). The weight of drive shaft (6) is approximately
20 kg (44 lb) . Install drive shaft (6) between the updrive gears and the transmission. - Apply Tooling (A) and then apply Tooling (B) to the threads of bolts (7). Install eight bolts (7). Tighten eight bolts (7) to a torque of
55 ± 7 N·m (41 ± 5 lb ft) .Show/hide tableIllustration 5 g01253082 - Install guard (5) and the four bolts.
- Install guard (4) and the two bolts.
- Install the clamp and bolt (3).
Show/hide table
Illustration 6 g01253079 - Install guard (2) and the four bolts.
- Install guard (1) and the two bolts.
Show/hide table
Illustration 4 | g01253083 |
End By:
- Remove the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".
Caterpillar Information System:
R1700G Load Haul Dump Power Train Drive Shaft (Rear) - Remove and Install
R1700G Load Haul Dump Remote Control System Interface Control Module
R1700G Load Haul Dump Power Train Drive Shaft (Center) - Remove and Install
R1700G Load Haul Dump Remote Control System Receiver
2006/03/27 Special Instruction, REHS3122, "Procedure to Improve the Clearance of Heater Wiring" Is Now Available {1408}
Air Conditioning and Heating R134a for All Caterpillar Machines System Capacities for Refrigerant (Compactors)
Instructions for Installing an Intermittent Saw Arrangement{6000, 6319, 6543} Instructions for Installing an Intermittent Saw Arrangement{6000, 6319, 6543}
773E Off-Highway Truck Air System and Brakes Slack Adjuster (Rear Brakes)
R1700G Load Haul Dump Power Train Differential and Bevel Gear (Rear) - Install
777F Off-Highway Truck Steering System Front Wheel
777F Off-Highway Truck Rear Axle Housing End Play - Adjust
587R Pipelayer Belts - Inspect/Adjust/Replace
R1700G Load Haul Dump Braking System System Pressure - Release
R1700G Load Haul Dump C11 Engine Supplement Turbocharger - Install
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines E194 High Exhaust Temperature
795F AC and 795F AC XQ Off-Highway Truck Fast Fill Center Toggle Switch (Fast Fill Service Center)
773F and 775F Off-Highway Truck Power Train Oil Filter (Power Train)
3306C Engines for Caterpillar Built Machines Fuel Shutoff Solenoid
414E, 416E, 420E and 430E Backhoe Loaders Machine Systems Swing Cylinder - Remove and Install
777F Off-Highway Truck Steering System Check and Relief Valve (Steering)
IT38H Integrated Toolcarrier and 938H Wheel Loader Capacities (Refill)
EquipmentManager Dealer Administrator Manual Health Watch
Large Soil Compactors Fuel System{1250, 1251, 1274} Large Soil Compactors Fuel System{1250, 1251, 1274}
C27 and C32 Engines for Caterpillar Built Machines Piston and Rings - C32 Engines