Engine Oil Cooler - Install
Installation Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Attach a suitable lifting device to engine oil cooler (11). The weight of engine oil cooler (11) is approximately 23 kg (50 lb).
Show/hide table
Illustration 1 | g01251745 |
- Install engine oil cooler (11) .
- Install two bolts (10) and two bolts (12) .
- Connect hose (13). Tighten the hose clamps.
- Install O-ring seal (6) and O-ring seal (8) to coupling (7) .
Show/hide table
Illustration 2 | g01252826 |
- Install O-ring seal (9) and coupling (7) to elbow (4) .
- Install elbow (4), six bolts (1) and five bolts (5) .
Show/hide table
Illustration 3 | g01251744 |
- Install bracket (3) and four bolts (2) .
- Fill the cooling system. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change" or Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the proper filling procedure.
End By:
- Install the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Install".
- Remove the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".
Caterpillar Information System:
R1700G Load Haul Dump C11 Engine Supplement Engine Oil Cooler - Remove
R1700G Load Haul Dump Power Train Fixed Axle and Oscillating Axle
R1700G Load Haul Dump Remote Control System General Information
R1700G Load Haul Dump Machine Systems Solenoid Valve (Lift Arm Positioner) - Remove and Install
770 and 772 Off-Highway Truck Hydraulic and Braking System Brake Valve (Parking)
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System MID 116 - CID 0190 - FMI 08
RM-500 Road Reclaimer/Soil Stabilizer Power Train Piston Motor (Front Propel) - Install
120M, 12M, 140M and 160M Motor Graders Power Train Speed Sensor (Transmission) - Input and Output
Air Conditioning and Heating R134a for All Caterpillar Machines System Capacities for Refrigerant (Integrated Toolcarriers)
587R Pipelayer Hydraulic System Oil Filters - Replace
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System MID 116 - CID 0457 - FMI 08
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System MID 116 - CID 0457 - FMI 04
R1700G Load Haul Dump Power Train Tire and Rim - Remove
R1700G Load Haul Dump C11 Engine Supplement Transmission Oil Cooler - Remove
R1700G Load Haul Dump C11 Engine Supplement Transmission Oil Cooler - Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Boom - Remove and Install
EquipmentManager Dealer Administrator Manual Time Fence and Geographic Fence
3408E and 3412E Engines for Caterpillar Built Machines Alternator and Regulator
M325D and M330D Excavators Machine Electronic Control System Electronic Control Module (ECM) - Configure
3408E and 3412E Engines for Caterpillar Built Machines Alternator and Regulator
RM-500 Road Reclaimer/Soil Stabilizer Power Train Final Drive Planetary (Front) - Remove
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System MID 116 - CID 0468 - FMI 03
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System MID 116 - CID 0468 - FMI 04
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System MID 116 - CID 0468 - FMI 08