Printing On the Hydraulic Oil Filter {5068}
- Backhoe Loader:
- 416D (S/N: BFP16440-16806)
- 420D (S/N: BLN13176-13332; FDP26329-26649)
- 430D (S/N: BNK7161-7205; BML5418-5440)
The part number that was printed on some hydraulic oil filters that were installed on some backhoe loaders was incorrect. Some hydraulic oil filters were printed with the part number 126-1818 Oil Filter. This was incorrect. The correct part number is 126-1817 Oil Filter .
For the listed machines, the hydraulic oil filter is part of the following arrangements: 214-6980 Hydraulic Ar, 214-6981 Hydraulic Ar, 214-6982 Hydraulic Ar, 214-6983 Hydraulic Ar and 214-6984 Hydraulic Ar
The material on the inside of the filter was correct. The filters do not need to be changed. The correct labeling on the hydraulic oil filters became effective in production with the following machines: BFP16807-UP, FDP26650-UP, BLN13333-UP, BNK7206-UP and BML5441-UP
Caterpillar Information System:
2005/12/12 Procedure for Installing the Camshaft Drive Gear {1212}
2014/01/31 Procedure for Installing the Camshaft Drive Gear {1212}
2006/01/23 A New Plug in the Hoist Control Valve Eliminates Overheating of the Hydraulic Oil {5136}
AP-800D and BG-230D Asphalt Pavers Fuel System - Prime
R1300G Series II Load Haul Dump Machine Electrical System Hydraulic Oil Temperature
R1300G Series II Load Haul Dump Steering Control
R1300G Series II Load Haul Dump Machine Electrical System Torque Converter Oil Temperature
R1300G Series II Load Haul Dump Machine Electrical System Actual Gear Indicator
Service Parts are Delayed for PR172, PR184, and PR190 Landscape Power Rake{6055, 7000} Service Parts are Delayed for PR172, PR184, and PR190 Landscape Power Rake{6055, 7000}
Miswiring Issues with Installation of the Product Link 121 and Product Link 321{7606} Miswiring Issues with Installation of the Product Link 121 and Product Link 321{7606}
R1300G Series II Load Haul Dump Machine Electrical System Engine Monitoring
PM-201 Cold Planer Machine Systems Relief Valve Pressure (Clutch) - Test and Adjust
CB-334E and CB-335E Series II Paving Compactors Towing the Machine
PM-201 Cold Planer Machine Systems Gear Pump (Fan Motor) - Test
Topcon® System Five Transducer - Clean/Inspect
AP-1000D and BG-260D Asphalt Pavers Machine Systems Hydraulic Cylinder (Hopper Hoist) - Remove and Install
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) MID 114 - CID 1396 - FMI 03
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) MID 114 - CID 1396 - FMI 05
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) MID 114 - CID 1396 - FMI 06
CB34, CB34XW and CC34 Utility Compactors Fuel System Water Separator - Drain
M325D L MH and M325D MH Material Handlers Hydraulic System Relief Valve (Main) - Test and Adjust
PM-201 Cold Planer Machine Systems Relief Valve (First Stage Conveyor) - Test and Adjust
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) MID 114 - CID 2160 - FMI 03
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) MID 114 - CID 2160 - FMI 05