Fuel Level
Show/hide table
Illustration 1 | g01226638 |
Fuel level circuit |
The components of the fuel level circuit are the Caterpillar Monitoring System ECM, the fuel level sensor, and the fuel level gauge.
Show/hide table
Illustration 2 | g01003366 |
(1) Caterpillar Monitoring System ECM (behind display) |
Show/hide table
Illustration 3 | g01222429 |
(2) Fuel level sensor |
Show/hide table
Illustration 4 | g01003368 |
(3) Fuel level gauge |
With the key start switch in the ON position, 24 volt power is supplied from the batteries through circuit breaker 13 to Caterpillar Monitoring System ECM (1) .
Fuel level sensor (2) sends a signal to Caterpillar Monitoring System ECM (1). Caterpillar Monitoring System ECM (1) sends the signal to the gauge module. Fuel level gauge (3) indicates the fuel level remaining within the tank.
Caterpillar Information System:
R1300G Series II Load Haul Dump Machine Electrical System Idle Timer/Fire Suppression Control
R1300G Series II Load Haul Dump Machine Electrical System Stop Light
R1300G Series II Load Haul Dump Machine Electrical System Rear Lights
R1300G Series II Load Haul Dump Machine Electrical System Head Light/Park Light
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) Data Card
2006/01/30 A New Aftercooler Core is Used {1063, 1064}
R1300G Series II Load Haul Dump Machine Electrical System Main Power Relay
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) System Components
773F and 775F Off-Highway Truck Engine Valve Lash - Check/Adjust
2005/11/28 Troubleshooting the Bucket Positioner Mechanism (Return to Dig Mechanism) {5051, 5109, 5112, 5734}
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Final Drive Planetary - Remove
M325D and M330D Excavators Power Train Electronic Control System Oscillating Axle Lock Function
R1300G Series II Load Haul Dump Machine Electrical System Horn
2005/11/28 Adding Weld Can Prevent Cracking of Rims {4202}
Bench Test Procedure For A 35, 45, and 55 Challenger Transmission {3030, 3073} Bench Test Procedure For A 35, 45, and 55 Challenger Transmission {3030, 3073}
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Position Sensor (Rotor Depth) - Calibrate
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Final Drive Planetary - Install
414E, 416E, 420E and 430E Backhoe Loaders Using Advisor to Determine Diagnostic Codes
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Transmission Hydraulic Control (Rotor) - Test
CB-534D, CB-534D XW and CB-564D Vibratory Compactors Machine Systems Piston Pump (Drum Propel) - Assemble
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Fan Speed - Test and Adjust
CB34, CB34XW and CC34 Utility Compactors Eccentric Weight Housing Oil - Change
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Wheel Alignment (Front) - Check and Adjust
2005/11/28 The Improved Toggle Switch For The Hood Tilt System Is Now Used {7251, 7332}