Gear Pump (Steering) - Assemble
组装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1P-1857 | 挡圈钳 | 1 |
注: 清洁度是一项重要的因素。 组装之前，应使用清洗剂彻底清洁所有零件。 让零件风干。 请勿使用抹布擦干零件。 棉绒可能会留在零件上，从而引发故障。 检查所有零件。 如果任何零件磨损或损坏，则应使用新零件进行更换。 尘土及其他污染物可能会损坏精密部件。 组装步骤应在清洁的工作面上进行。 务必盖上部件并采取适当保护措施。
注: 检查 O 形密封圈、垫片和密封件有无磨损或损坏。 如有必要，请更换部件。
- 将轴密封件 (20) 安装在法兰 (18) 中。
Show/hide table
 | |
| 图 1 | g01190468 |
- 使用工具 (A) 安装挡圈 (19) 。
- 将 O 形密封圈 (17) 装入壳体 (10) 中。
Show/hide table
 | |
| 图 2 | g01190450 |
- 将密封件 (15) 和支承环 (16) 安装在轴承 (14) 中。
Show/hide table
 | |
| 图 3 | g01190444 |
- 将齿轮 (13) 安装在壳体 (10) 中。
Show/hide table
 | |
| 图 4 | g01190382 |
- 将齿轮 (13) 安装在壳体 (10) 中。
Show/hide table
 | |
| 图 5 | g01190370 |
- 将密封件 (12) 和支承环 (11) 安装在轴承 (9) 中。
Show/hide table
 | |
| 图 6 | g01190365 |
- 将 O 形密封圈 (8) 和轴承 (9) 安装到壳体 (10) 中。
Show/hide table
 | |
| 图 7 | g01190343 |
- 将 O 形密封圈 (6) 安装到螺塞 (5) 上。
Show/hide table
 | |
| 图 8 | g01190334 |
- 将滑阀 (7) 和螺塞 (5) 安装在端盖 (2) 中。
- 拧紧端盖 (2) 上的螺塞 (5) 。
Show/hide table
 | |
| 图 9 | g01190328 |
- 将弹簧 (4) 和阀芯 (3) 安装在端盖 (2) 中。
Show/hide table
 | |
| 图 10 | g01190233 |
Show/hide table
 |
弹簧压缩零件如果安装不当，会伤害人体。 为避免伤害，遵照出版的装配程序，并穿上保护装备。 |
- 将端盖 (2) 安装在齿轮泵上。
Show/hide table
 | |
| 图 11 | g01190228 |
- 将螺栓 (1) 安装到齿轮泵中。
End By: 将齿轮泵（转向）安装在发动机上。 参考 拆解和装配, "齿轮泵（转向）- 安装"。
Caterpillar Information System:
793D Off-Highway Truck Hydraulic Fan System Steering Tank and Filter
Maintenance Procedure for the Torque Limiting Coupling on the Road Reclaimer/Soil Stabilizer{5632} Maintenance Procedure for the Torque Limiting Coupling on the Road Reclaimer/Soil Stabilizer{5632}
725 and 730 Articulated Trucks Monitoring System
793D Off-Highway Truck Engine Supplement Air Compressor - Remove
793D Off-Highway Truck Engine Supplement Air Compressor - Install
793D Off-Highway Truck Air System and Brakes Service and Parking Brake (Front)
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Loader) (Mechanically Operated)
414E, 416E, 420E and 430E Backhoe Loaders Axles, Differential and Brakes Drive and Steering Axle (Front)
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Auxiliary) - Disassemble
414E, 416E, 420E and 430E Backhoe Loaders Axles, Differential and Brakes Axle (Front) - Two-Wheel Drive
793D Off-Highway Truck Air System and Brakes Service and Parking Brake (Front)
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0673 - FMI 02
Instructions for Converting Harvester Head Saw to Intermittent Saw {5051, 5051, 5057, 6543} Instructions for Converting Harvester Head Saw to Intermittent Saw {5051, 5051, 5057, 6543}
24M Motor Grader Hydraulic and Steering System Control Valve (Centershift)
793D Off-Highway Truck Hydraulic Fan System Piston Pump (Hydraulic Fan)
Installation Procedure of the Ladder Group and Walkway Group Field Upgrade Kit for the 789 Off-Highway Truck{7254, 7255} Installation Procedure of the Ladder Group and Walkway Group Field Upgrade Kit for the 789 Off-Highway Truck{7254, 7255}
24M Motor Grader Hydraulic and Steering System Control Valve (Circle Drive)
2005/08/15 The Axle Lock for the Rear Axle Has Been Removed {5130, 7201}
793D Off-Highway Truck Engine Supplement Fuel Transfer Pump - Remove
793D Off-Highway Truck Engine Supplement Fuel Transfer Pump - Install
R1600G Load Haul Dump Machine Systems Diverter Valve (Secondary Steering) - Assemble
R1600G Load Haul Dump Machine Systems Diverter Valve (Secondary Steering) - Remove
R1600G Load Haul Dump Machine Systems Diverter Valve (Secondary Steering) - Install
R1600G Load Haul Dump Machine Systems Accumulator Charging Valve (Brake) - Remove