414E, 416E, 420E and 430E Backhoe Loaders Axles, Differential and Brakes Caterpillar


Axle (Front) - Two-Wheel Drive

Usage:

416E BWC


Illustration 1g02813156

Table 1
Specification for 230-5745 Front Axle Gp 
Item  Qty  Part  Specification Description 
16  199-0683 Bolt  Torque to 255 to 315 N·m (188 to 232 lb ft)
As required, use the following shims during bearing preload: 
4 198-7841 Shim  Thickness of one shim is 0.15 mm (0.006 inch)
4 198-7842 Shim  Thickness of one shim is 0.20 mm (0.008 inch)
4 198-7843 Shim  Thickness of one shim is 0.50 mm (0.0197 inch)
Before assembly, apply desert gold grease to bores of the pin, the seals, and the O-rings. 
Before assembly, pack the king pin bearings with the EP grease. 
290-4164 Bolt  Before assembly, apply Loctite 270 to the threads. 
Torque to 391 to 483 N·m (288 to 356 lb ft).
Tighten the ball joint to 255 to 315 N·m (188 to 232 lb ft)
Tighten the nut to 212.5 to 262.5 N·m (157 to 194 lb ft)
207-4262 Bolt  Before assembly, apply Loctite 270 to the threads. 
098-5747 Nut  Torque to 97.5 to 157.5 N·m (71.9 to 116.2 lb ft)
207-4258 Nut  Torque to 187 to 231 N·m (138 to 170 lb ft)
10  8T-4139 Bolt  Before assembly, apply Loctite 270 to the threads. 
Torque to 102 to 126 N·m (75 to 93 lb ft).
11  207-4255 Plug  Torque to 25.5 to 31.5 N·m (225.7 to 278.8 lb in)

Caterpillar Information System:

793D Off-Highway Truck Air System and Brakes Service and Parking Brake (Front)
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0673 - FMI 02
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Temperature Sensor
793D Off-Highway Truck Engine Supplement Water Pump (Aftercooler) - Remove and Install
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0672 - FMI 01
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0627 - FMI 04
2005/08/01 Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
C9.3 Tier 4 Final Engines Atmospheric Pressure Sensor
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0627 - FMI 03
RM-300 Reclaimer Mixer Power Train Propel Hydraulic System
RM-300 Reclaimer Mixer Power Train Propel Electrical System
RM-300 Reclaimer Mixer Power Train Piston Pump (Propel)
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Auxiliary) - Disassemble
414E, 416E, 420E and 430E Backhoe Loaders Axles, Differential and Brakes Drive and Steering Axle (Front)
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Loader) (Mechanically Operated)
793D Off-Highway Truck Air System and Brakes Service and Parking Brake (Front)
793D Off-Highway Truck Engine Supplement Air Compressor - Install
793D Off-Highway Truck Engine Supplement Air Compressor - Remove
725 and 730 Articulated Trucks Monitoring System
Maintenance Procedure for the Torque Limiting Coupling on the Road Reclaimer/Soil Stabilizer{5632} Maintenance Procedure for the Torque Limiting Coupling on the Road Reclaimer/Soil Stabilizer{5632}
793D Off-Highway Truck Hydraulic Fan System Steering Tank and Filter
CB-534D, CB-534D XW and CB-564D Vibratory Compactors Machine Systems Gear Pump (Steering) - Assemble
Instructions for Converting Harvester Head Saw to Intermittent Saw {5051, 5051, 5057, 6543} Instructions for Converting Harvester Head Saw to Intermittent Saw {5051, 5051, 5057, 6543}
24M Motor Grader Hydraulic and Steering System Control Valve (Centershift)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.