Piston Pump (Hydraulic Generator) - Assemble
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 1P-0510 | Driver Gp | 1 |
B | 1P-1861 | Retaining Ring Pliers | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install spools (53), O-ring seals (52), and plugs (51) in control valve (44).
- Install retainer (46), spring (47), spring (48), O-ring seal (49), and valve (50) in control valve (44).
- Install retainer (35), springs (36), O-ring seal (37), backup ring (38), O-ring seal (39), and valve (40) in control valve (44).
- Install O-ring seal (43) on plug (42). Install plug (42) in control valve (44).
- Install plugs (45) in control valve (44).
- Install O-ring seals (54) on control valve (44).
- Install control valve (44) on housing (3) and install bolts (41).
Show/hide table
Illustration 2 g01188198 - Install lip seal (34) in housing (3).
- Use Tooling (B) and install retaining ring (33) in housing (3).
Show/hide table
Illustration 3 g01188197 - Install bearing cone (32) from housing (3).
- Install bearings (31) in housing (3).
Show/hide table
Illustration 4 g01188196 - Install swashplate (30) and shaft (29) in housing (3).
Show/hide table
Illustration 5 g01188195 - Install O-ring seal (28) on plug (25).
Show/hide table
Illustration 6 g01188194 - Install O-ring seal (27) and O-ring seal (26) on housing (3).
- Install plug (25) in housing (3).
Show/hide table
Illustration 7 g01188193 - Install piston (24) and spring (23) in housing (3).
Show/hide table
Illustration 8 g01188191 - Install O-ring seal (22), O-ring seal (21), and backup ring (20) on piston (19).
Show/hide table
Illustration 9 g01188190 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Install piston (19) in housing (3).
Show/hide table
Illustration 10 g01188408 - Install washer (18), spring (17), washer (16), and retaining ring (15).
Show/hide table
Illustration 11 g01188392 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Use a suitable press, Tooling (A), and Tooling (B) in order to install retaining ring (15) in the barrel assembly.
Show/hide table
Illustration 12 g01188387 - Install ring (13) in barrel assembly (11).
- Install pins (14) in barrel assembly (11).
Show/hide table
Illustration 13 g01188379 - Install retainer (12) on barrel assembly (11).
Show/hide table
Illustration 14 g01188352 - Install plate (9) and pistons (10) on barrel assembly (11).
Show/hide table
Illustration 15 g01188189 - Install rotating group (8) in housing (3).
- Install bearing cone (7) in housing (3).
Show/hide table
Illustration 16 g01188188 - Install O-ring seal (6) in head (1).
- Install port plate (5) in head (1).
- Install bearing cup (4) in head (1).
Show/hide table
Illustration 17 g01188187 - Install head (1) and bolts (2) on housing (3).
Show/hide table
Illustration 1 | g01189410 |
End By:
- Install the piston pump (hydraulic generator). Refer to Disassembly and Assembly, "Piston Pump (Hydraulic Generator) - Install".
Caterpillar Information System:
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System Relief Valve (Load Sensing Signal)
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0590 - FMI 02
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0585 - FMI 02
793D Off-Highway Truck Engine Supplement Engine Oil Pump - Install
793D Off-Highway Truck Engine Supplement Engine Oil Pump - Remove
3524B and C175 Engines for Off-Highway Truck/Tractors Reinforcement Plate
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0562 - FMI 09
CP74B, CS74B, CP76B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Axle Housing, Axle Shaft, and Wheel Flange - Assemble
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0562 - FMI 02
2005/08/15 The Configuration for the Machine Electronic Control Module Has Changed {7610}
735 Articulated Truck Power Train Final Drive - Install
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0444 - FMI 06
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Axle Housing (Service Brakes, Differential and Bevel Gear) - Disassemble
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0590 - FMI 09
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Axle Housing (Service Brakes, Differential and Bevel Gear) - Assemble
AP-1055D and BG-2455D Asphalt Pavers Auxiliary System Auxiliary System Troubleshooting
793D Off-Highway Truck Engine Supplement Air Cleaner - Assemble
793D Off-Highway Truck Engine Supplement Air Cleaner - Disassemble
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0596 - FMI 02
AP-1055D and BG-2455D Asphalt Pavers Auxiliary System Piston Pump Flow (Auxiliary) - Test and Adjust
14M and 16M Motor Graders Hydraulic and Steering System Control Valve (Articulation)
966H Wheel Loader and 972H Wheel Loader Power Train MID 081 - CID 0596 - FMI 09
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Priority Valve
Installation Instruction for 212-7779 Shock Absorber Kit , 192-7848 Shock Absorber Kit , and 213-5170 Indicator Kit on Toggle Link Vertical (TLV) Seat Suspensions {7324} Installation Instruction for 212-7779 Shock Absorber Kit , 192-7848 Shock Absorber Kit , and 213-5170 Indicator Kit on Toggle Link Vertical (TLV) Seat Suspensions {7324}