950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Braking and Hydraulic Fan System Caterpillar


Parking Brake - Manual Release

Usage:

950H J5J

------ WARNING! ------

Personal injury or death can result from a brake malfunction. Do not operate the machine if the parking brake was engaged due to a malfunction of the hydraulic oil system or the service brakes.

Correct any problem before attempting to operate the machine.

----------------------

  1. Chock the wheels in order to keep the machine from rolling when the parking brake is disengaged.



    Illustration 1g01178909

    Steering frame lock in the LOCKED position

  1. Connect the steering frame lock to the front and rear frames.



    Illustration 2g00818409

    Actuator for the Parking Brake

    (2) Actuator shaft. (3) Locknut. (4) Rod end.

    Typical Example

    Note: The hydraulic hoses have been removed for clarity.

  1. Loosen locknut (3) down rod (4) to a length of 18 mm (3/4 inch). Turn rod (4) until the rod moves out enough to totally disengage the parking brake.

Reference: For additional information on testing the parking brake, refer to Testing And Adjusting, "Parking Brake - Test" for the machine that is being serviced.


NOTICE

Before you operate the machine, and after the parking brake has been serviced, be sure you adjust the parking brake mechanism.

Failure to do so could damage the parking brake components or prevent the parking brake from functioning correctly.


Caterpillar Information System:

IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Machine Systems Piston Pump (Brake, Hydraulic Fan) - Install
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Machine Systems Piston Pump (Brake, Hydraulic Fan) - Remove
966H Wheel Loader and 972H Wheel Loader Braking and Hydraulic Fan System Hydraulic Oil Contamination - Test
C6.6 Engines for Caterpillar Built Machines Fuel Injection Nozzles
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Fuel System - Prime
966H Wheel Loader and 972H Wheel Loader Braking and Hydraulic Fan System Machine Preparation for Troubleshooting
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders C7 Engine Supplement Starting Aid (Air Inlet Heater) - Install
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders C7 Engine Supplement Starting Aid (Air Inlet Heater) - Remove
C15 and C18 Engines for Caterpillar Built Machines Piston and Rings
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Steering System Pilot Valve (Command Control Steering)
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0254 - FMI 12
C9 Engine for Caterpillar Built Machines Pump Drive - Install
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Braking and Hydraulic Fan System Parking Brake Actuator - Adjust
2005/07/18 New Clips Improve the Service Life of the Service Brake Line {4257}
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0262 - FMI 06
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Steering System Check Valve (Steering Quad) (Command Control Steering)
2005/07/04 A New High Temperature Gasket is Now Used {1057}
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Braking and Hydraulic Fan System Parking Brake - Test
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Braking and Hydraulic Fan System Service Brakes - Test
2005/11/07 An Updated Pump Has Improved Sealing Capability {5073}
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Fuel System Primary Filter (Water Separator) - Drain
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Steering System Steering Control Valve (Command Control Steering)
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Cab Filter (Fresh Air) - Clean/Inspect/Replace
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Power Train Torque Converter (Freewheel Stator)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.