Saving Display Settings or Machine Settings
Note: The contents of the "Setup Menu" dialog are site configurable. Depending on the "Operator Configuration" settings of your system and machine setting, the number of items in the "Setup Menu" may vary. Refer to your site manager if a specific option is not available.
Use the Save Settings dialog to save display settings, machine settings, or both to a data card. From this dialog, you can save all the settings in the Setup Menu – Configuration dialog.
You can customize and save the text items that are shown on the guidance screens by saving the display settings.
In order To access the Save Settings dialog complete the following steps:
- Make sure that a data card is inserted in the Display.
- From the Setup Menu – Configuration dialog, press the Down arrow or the Up arrow until "Save Settings" is highlighted. Press the OK key in order to continue.
- The "Save Settings" dialog appears. Press the Down arrow or the Up arrow in order to select either "Display Settings" or "Machine Settings".
 | |
| Illustration 1 | g01206514 |
- Press the OK key . The dialog shown in Illustration 2 appears.
The default file name for display settings is "DISPLAY NN". The default file name for machine settings is "GRADER NN".
"NN" is a two digit number starting at 01 and incrementing with each new settings file that is saved.
The number assigned to a new Display settings file is one more than any similarly named settings file already on the data card. For example, if there is already a dozer machine settings file (called GRADER 01) on the card, the AccuGrade System assigns the name "GRADER 02".
You can also save the settings to a file name that is more descriptive. For example, you can use a name such as "12HGRADER". Use the arrow keys to edit the default name.
Note: You cannot use the Display to overwrite or delete an existing settings file.
 | |
| Illustration 2 | g01206519 |
- In order to save the settings to the data card, press the OK key. After saving, the Save Settings dialog appears. Press the "Esc" key in order to go back to the Setup Menu dialog.
In order to close the dialog without saving the configuration to the data card, press the "Esc" key. The Save Settings dialog appears.
Note: If you change the default name, and then press the "Esc" key, you are prompted to confirm that you want to abandon your changes.