Metering Pump (HMU Steering) - Install
安装步骤
- 安装转向计量泵 (3) 。
Show/hide table
 | |
| 图 1 | g00407062 |
Show/hide table
 | |
| 图 2 | g00407061 |
- 安装四个螺栓 (4) 。
- 连接五个软管组件 (5) 。
- 在机器的每一侧安装面板 (1) 和五个螺栓 (2) 。
Show/hide table
 | |
| 图 3 | g00407063 |
End By: 分离转向机架锁。 请参阅 拆解和组装, "转向机架锁 - 分离和连接"。
Caterpillar Information System:
966H and 972H Wheel Loaders Machine Systems Metering Pump (HMU Steering) - Remove
789C Off-Highway Truck Front Wheel Oil - Change
784C and 785C Off-Highway Truck/Tractors Front Axle Breather - Replace
2005/05/02 A New Water Strainer is Now Used on the Paving Compactor {6609}
725, 730 and 730 Ejector Articulated Trucks Engine Supplement Engine - Install
AP-1055D and BG-2455D Asphalt Pavers Conveyor Systems Relief Valve (Charge) - Test and Adjust
C4.4 Industrial Engine After Stopping Engine
AP-1055D and BG-2455D Asphalt Pavers Conveyor Systems Piston Pump Flow - Test - Conveyor and Auger
793D Off-Highway Truck Ether Starting Aid Cylinder - Replace
2005/06/13 A New Relief Valve with Increased Durability Is Available {5069, 5117}
C4.4 Industrial Engine Monitoring System
12M Motor Grader Hydraulic System Oil - Change
966H and 972H Wheel Loaders Machine Systems Pilot Valve (Command Control Steering) - Disassemble
966H and 972H Wheel Loaders Machine Systems Pilot Valve (Command Control Steering) - Assemble
789C Off-Highway Truck Front Wheel Oil Sample - Obtain
2007/06/04 A Redesigned Fuel Tank Eliminates the Filler Neck and Fuel Cap From Coming In Contact with Certain MSD Bodies {1273}
793D Off-Highway Truck Secondary Steering - Check
AP-1055D and BG-2455D Asphalt Pavers Conveyor Systems Relief Valve (Main) - Test - Drag Conveyor and Auger Conveyor
2005/05/30 A Harness is Available to Adapt a Screed from a D Series Tractor onto a B Series Tractor {1408}
RM-300 Soil Stabilizer Bolster Oscillation Pin (Rear) - Lubricate
735 and 740 Articulated Trucks Monitoring System
740 EJECTOR Articulated Truck Monitoring System
RM-300 Soil Stabilizer Cooling System Coolant (ELC) - Change
2005/05/09 A New Relief Valve Prevents Movement of Work Tools {5051, 5117}