A Harness is Available to Adapt a Screed from a D Series Tractor onto a B Series Tractor {1408}
- Asphalt Paver:
- AP-1055B (S/N: ABB1-UP; 8BM1-UP; A3P1-UP)
- Asphalt Screed:
- 10-20B (S/N: BWN2000-UP)
- BG-2455C (S/N: B2G1-UP; ACM1-UP; 6TN1-UP)
- AS2301 (S/N: AWC1000-UP)
A 229-3164 Screed Harness Assembly is available to adapt a screed from a D Series tractor onto a B series tractor. The 229-3164 Screed Harness Assembly replaces the 243-1845 Screed Harness Assembly when this conversion is performed.
The 229-3164 Screed Harness Assembly has two round connectors that are used to connect to the B Series tractors instead of a single rectangular connector. The end of the harness that connects to the screed is still rectangular in shape.
The panels in the control boxes need to be reworked with the following parts if the screed is installed onto a AP-900B.
Show/hide table
Required Parts for the Right Hand Control Panel     | |||
---|---|---|---|
Item     | Part Number     | Description     | Qty     |
1     | 3E-6477     | Relay As     | 2     |
2     | 7S-1197     | Screw     | 2     |
3     | 196-1307     | Panel Harness As     | 2     |
4     | 197-9829     | Panel Harness As     | 1     |
5     | 4B-4863     | Washer     | 2     |
6     | 7T-3946     | Toggle Switch     | 1     |
Show/hide table
Illustration 1 | g01164463 |
Right Hand Control Panel |
Show/hide table
Required Parts for the Left Hand Control Panel     | |||
---|---|---|---|
Item     | Part Number     | Description     | Qty     |
7     | 3E-6477     | Relay As     | 2     |
8     | 7S-1197     | Screw     | 2     |
9     | 196-1307     | Panel Harness As     | 2     |
10     | 197-9829     | Panel Harness As     | 1     |
11     | 4B-4863     | Washer     | 2     |
12     | 7T-3946     | Toggle Switch     | 1     |
Show/hide table
Illustration 2 | g01164465 |
Left Hand Control Panel |
Caterpillar Information System:
AP-1055D and BG-2455D Asphalt Pavers Conveyor Systems Relief Valve (Main) - Test - Drag Conveyor and Auger Conveyor
793D Off-Highway Truck Secondary Steering - Check
2007/06/04 A Redesigned Fuel Tank Eliminates the Filler Neck and Fuel Cap From Coming In Contact with Certain MSD Bodies {1273}
789C Off-Highway Truck Front Wheel Oil Sample - Obtain
966H and 972H Wheel Loaders Machine Systems Pilot Valve (Command Control Steering) - Assemble
966H and 972H Wheel Loaders Machine Systems Pilot Valve (Command Control Steering) - Disassemble
966H and 972H Wheel Loaders Machine Systems Metering Pump (HMU Steering) - Install
966H and 972H Wheel Loaders Machine Systems Metering Pump (HMU Steering) - Remove
789C Off-Highway Truck Front Wheel Oil - Change
784C and 785C Off-Highway Truck/Tractors Front Axle Breather - Replace
2005/05/02 A New Water Strainer is Now Used on the Paving Compactor {6609}
725, 730 and 730 Ejector Articulated Trucks Engine Supplement Engine - Install
RM-300 Soil Stabilizer Bolster Oscillation Pin (Rear) - Lubricate
735 and 740 Articulated Trucks Monitoring System
740 EJECTOR Articulated Truck Monitoring System
RM-300 Soil Stabilizer Cooling System Coolant (ELC) - Change
2005/05/09 A New Relief Valve Prevents Movement of Work Tools {5051, 5117}
793D Off-Highway Truck Oil Filter (Steering, Hydraulic Fan) - Replace - Hydraulic Pump Case Drain
12M Motor Grader Rollover Protective Structure (ROPS) - Inspect
RM-300 Soil Stabilizer Cooling System Coolant Extender (ELC) - Add
RM-300 Soil Stabilizer Cooling System Coolant Level - Check
RM-300 Soil Stabilizer Cooling System Pressure Cap - Clean/Replace
RM-300 Soil Stabilizer Capacities (Refill)
RM-300 Soil Stabilizer Cooling System Coolant Sample (Level 1) - Obtain