Speed/Timing Sensor - Remove and Install
拆卸步骤
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品，参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 断开线束组件 (3) 。
Show/hide table
 | |
| 图 1 | g01155038 |
- 拆下螺栓 (2) 。
- 拆下转速/正时传感器 (1) 。
- 从转速/正时传感器 (1) 上拆下 O 形密封圈。
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将新 O 形密封圈安装在转速/正时传感器 (1) 上。
注: 转速/正时传感器必须成对更换。
Show/hide table
| | |
| 图 2 | g01155038 |
- 安装之前，在 O 型密封圈上涂抹清洁的发动机机油。
- 将转速/正时传感器 (1) 安置在发动机上。
- 安装螺栓 (2) 并拧紧至扭矩为 28 ± 7 N·m (21 ± 5 lb in)。
注: 确保转速/正时传感器就位在传感器法兰上，然后再拧紧支架上的螺栓。
- 连接线束组件 (3) 。
Caterpillar Information System:
2005/04/25 A New Spring for the Scraper is Now Used on the Asphalt Compactors {6607}
730 Ejector Articulated Truck Machine Systems Control Manifold (Ejector) - Assemble
730 Ejector Articulated Truck Machine Systems Control Manifold (Ejector) - Disassemble
C7 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
C7 Engines for Caterpillar Built Machines Injection Actuation Pressure Sensor - Remove and Install
C7 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
AP-650B and BG-225C Asphalt Pavers Engine Supplement Electric Starting Motor - Remove and Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Hydraulic Cylinder (Hood Tilt)
C7 Engines for Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
PM-201 Cold Planer Machine Systems Hydraulic Cylinder (Elevation)
C7 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
2005/03/28 An Improved Battery Cable and Mounting Hardware Is Now Available {1401, 1402}
C7 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
9EQ7160 Ejector Bucket Supplement for the R1700G Load Haul Dump{6128, 7000} 9EQ7160 Ejector Bucket Supplement for the R1700G Load Haul Dump{6128, 7000}
AD45B Underground Articulated Truck Braking System Accumulator Charging Valve (Brake)
R2900G Load Haul Dump C15 Engine Supplement Engine, Torque Converter and Updrive Gears - Remove
C7 Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install
AccuGrade® Laser (CB420) Menus
C7 Engines for Caterpillar Built Machines Fan Drive Mounting Group - Remove and Install
AP-650B and BG-225C Asphalt Pavers Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
777D and 777D HAA Off-Highway Truck and 776D Off-Highway Tractor Air Tank Moisture and Sediment - Drain
730 EJECTOR Articulated Truck Machine Systems Main Control Valve
C7 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System System Schematic