Coolant Temperature Sensor - Remove and Install
拆卸步骤
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品，参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将冷却系统的冷却液中排入适当的容器至液位低于冷却液温度调节器，以便保存或废弃。 请参考操作和保养手册, "冷却系统冷却液 - 更换"。
- 断开线束组件 (2) 。
Show/hide table
 | |
| 图 1 | g01154951 |
- 拆下冷却液温度传感器 (1) 。
- 将 O 形密封圈从冷却液温度传感器 (1) 上拆下。
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将一个新的 O 形密封圈安装在冷却液温度传感器 (1) 上。
Show/hide table
| | |
| 图 2 | g01154951 |
- 安装冷却液温度传感器 (1) 并拧紧至扭矩为 20 ± 5 N·m (15 ± 4 lb ft)。
- 连接线束组件 (2) 。
- 向冷却系统加注冷却液。 请参考操作和保养手册, "冷却系统冷却液 - 更换"。
Caterpillar Information System:
PM-201 Cold Planer Machine Systems Hydraulic Cylinder (Elevation)
C7 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
2005/03/28 An Improved Battery Cable and Mounting Hardware Is Now Available {1401, 1402}
AccuGrade® Laser (CB420) Modes of Operation
AP-650B and BG-225C Asphalt Pavers Engine Supplement Alternator - Remove and Install
AccuGrade® Laser (CB420) General Information
C9.3 Engine for Caterpillar Built Machines Boost Pressure Sensor
R1600G Load Haul Dump Machine Electrical System Service Tools
RM-300 Soil Stabilizer Specifications
Installation of a 3306 Engine Emissions Upgrade Group for a 140G Motor Grader{1000} Installation of a 3306 Engine Emissions Upgrade Group for a 140G Motor Grader{1000}
RM-300 Soil Stabilizer Indicators and Gauges - Test
C7 Engines for Caterpillar Built Machines Electric Starting Motor
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Hydraulic Cylinder (Hood Tilt)
AP-650B and BG-225C Asphalt Pavers Engine Supplement Electric Starting Motor - Remove and Install
C7 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
C7 Engines for Caterpillar Built Machines Injection Actuation Pressure Sensor - Remove and Install
C7 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
730 Ejector Articulated Truck Machine Systems Control Manifold (Ejector) - Disassemble
730 Ejector Articulated Truck Machine Systems Control Manifold (Ejector) - Assemble
2005/04/25 A New Spring for the Scraper is Now Used on the Asphalt Compactors {6607}
C7 Engines for Caterpillar Built Machines Speed/Timing Sensor - Remove and Install
C7 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
9EQ7160 Ejector Bucket Supplement for the R1700G Load Haul Dump{6128, 7000} 9EQ7160 Ejector Bucket Supplement for the R1700G Load Haul Dump{6128, 7000}
AD45B Underground Articulated Truck Braking System Accumulator Charging Valve (Brake)