Engine Oil Filter and Oil Filter Base - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 187-2718     | Filter Wrench As     | 1     |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool. |
- Use Tooling (A) and remove oil filter (3) from oil filter base (1) .
Show/hide table
Illustration 1 | g01155237 |
- Remove bolts (2), oil filter base (1), and gasket (4) from the engine.
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
B     | 9S-3263     | Thread Lock Compound     | 1     |
- Apply Tooling (B) to bolts (2). Install gasket (4), oil filter base (1), and bolts (2) .
Show/hide table
Illustration 2 | g01155237 |
- Install oil filter (3) .
Caterpillar Information System:
C7 Engines for Caterpillar Built Machines Fan Drive Mounting Group - Remove and Install
AccuGrade® Laser (CB420) Menus
C7 Engines for Caterpillar Built Machines Fuel Pressure Sensor - Remove and Install
R2900G Load Haul Dump C15 Engine Supplement Engine, Torque Converter and Updrive Gears - Remove
AD45B Underground Articulated Truck Braking System Accumulator Charging Valve (Brake)
9EQ7160 Ejector Bucket Supplement for the R1700G Load Haul Dump{6128, 7000} 9EQ7160 Ejector Bucket Supplement for the R1700G Load Haul Dump{6128, 7000}
C7 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C7 Engines for Caterpillar Built Machines Speed/Timing Sensor - Remove and Install
2005/04/25 A New Spring for the Scraper is Now Used on the Asphalt Compactors {6607}
730 Ejector Articulated Truck Machine Systems Control Manifold (Ejector) - Assemble
730 Ejector Articulated Truck Machine Systems Control Manifold (Ejector) - Disassemble
C7 Engines for Caterpillar Built Machines Turbocharger Outlet Pressure Sensor - Remove and Install
777D and 777D HAA Off-Highway Truck and 776D Off-Highway Tractor Air Tank Moisture and Sediment - Drain
730 EJECTOR Articulated Truck Machine Systems Main Control Valve
C7 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System System Schematic
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Electrohydraulic System Diagnostic Code List
C7 Engines for Caterpillar Built Machines Alternator - Remove and Install
120M, 12M, 140M and 160M Motor Graders Power Train Drive Chain
AccuGrade® Laser (CB420) System Setup
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor
C7 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C7 Engines for Caterpillar Built Machines Fan Drive Mounting Group
2005/10/03 A New Hand Metering Unit is Now Used on the Soil Compactor {4343}