725 and 730 Articulated Trucks Caterpillar


Brake Accumulator (Service) - Check

Usage:

725 B1L

------ PERINGATAN! ------

Cedera tubuh atau kematian dapat terjadi akibat pengisian akumulator yang tidak tepat.

Nitrogen Kering adalah satu-satunya gas yang disetujui untuk digunakan dalam akumulator. Pengisian akumulator dengan oksigen dapat menyebabkan ledakan. Bahaya ini tidak akan terjadi jika silinder nitrogen dengan standar koneksi CGA (Compressed Gas Association, Inc.) Nomor 580 digunakan.

Ketika memesan gas nitrogen, pastikan bahwa silinder dilengkapi dengan koneksi CGA Nomor 580. Jangan gunakan kode warna atau metode lain untuk mengidentifikasi perbedaan antara silinder nitrogen dan oksigen

Jangan pernah menggunakan adapter untuk menghubungkan grup pengisian nitrogen Anda ke saluran keluar katup yang digunakan pada silinder nitrogen, oksigen, atau gas lainnya. PASTIKAN ANDA MENGGUNAKAN NITROGEN KERING (tingkat kemurnian 99,8%).


Rujuk ke Pengoperasian Sistem, Pengujian dan Penyetelan , "Akumulator Rem (Servis) - Pengujian dan Pengisian" untuk informasi selengkapnya.

Caterpillar Information System:

789C Off-Highway Truck/Tractor Water Lines (Coolers)
793D Off-Highway Truck Backup Alarm - Test
966H and 972H Wheel Loaders Circuit Breakers - Reset
988H Wheel Loader Machine Systems Demand Fan Valve - Assemble
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Axle Oscillation Bearings - Lubricate
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Camshaft Position Sensor - Remove and Install
988H Wheel Loader Machine Systems Demand Fan Valve - Disassemble
C11 and C13 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C9.3 Tier 4 Final Engines Fuel Filter Base
2005/01/17 New Bearings for the Engine Oil Pump are Available {1304}
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Gear Pump (Conveyor System Charge, Vibratory) - Remove
735 and 740 Articulated Trucks Torque Converter and Transmission Oil Level - Check
735 and 740 Articulated Trucks Torque Converter and Transmission Oil Sample - Obtain
R2900G Load Haul Dump Steering System Wheel Steering System
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Manifold Gauge Set (Refrigerant) - Remove
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Engine Oil Pump - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
C11 and C15 Engines for Caterpillar Built Machines System Configuration Parameters
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Gear Pump (Conveyor System Charge, Vibratory) - Disassemble
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Gear Pump (Conveyor System Charge, Vibratory) - Assemble
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Gear Pump (Conveyor System Charge, Vibratory) - Install
793C Off-Highway Truck Machine Systems Tire and Rim (Front) - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.