C9.3 Tier 4 Final Engines Caterpillar


Fuel Filter Base

Usage:

D6T 2B3


图 1g03834268
典型示例

表 1
190-8970 燃油注油泵总成、 217-8339 燃油注油泵组件和 235-8724 输油泵总成的技术规格 
项目  数量  零件  技术规格说明 
6D-5801 锁紧螺母  拧紧至扭矩为 1.7 ± 0.4 N·m (15.0 ± 3.5 lb in)。 
179-7267 塞  拧紧至扭矩为 95 ± 10 N·m (70 ± 7 lb ft)。 
9S-8002 O 形密封圈塞  拧紧至扭矩为 11 ± 2 N·m (97 ± 18 lb in)。 
162-2222 弹簧  在测试力下的长度为 20.21 mm (0.796 in)
测试力为 1.01 ± 0.05 N (0.23 ± 0.01 lb)
测试后的自由长度为 31.75 mm (1.250 in)。 
9S-4167 空心螺柱  将红色 Loctite 263 涂覆到螺纹的 11.0 ± 0.5 mm (0.43 ± 0.02 in) 的长度 (D) 上。
拧紧至扭矩为 70 ± 15 N·m (52 ± 11 lb ft)。 

Caterpillar Information System:

2005/01/17 New Bearings for the Engine Oil Pump are Available {1304}
C11 and C15 Engines for Caterpillar Built Machines E172 High Air Filter Restriction
C7 Engines for Caterpillar Built Machines Cooling System - Test
C11 and C13 Engines for Caterpillar Built Machines Boost Pressure Sensor - Remove and Install
735 and 740 Articulated Trucks Torque Converter and Transmission Oil - Change
3176C Engines for Caterpillar Built Machines CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C Engines for Caterpillar Built Machines CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
735 and 740 Articulated Trucks Torque Converter and Transmission Oil Filter - Replace
C11 and C13 Engines for Caterpillar Built Machines Fuel Temperature Sensor - Remove and Install
311B, 312B, 315B, 320B, 322B, 325B and 330B Excavators Air Conditioning and Heating Refrigerant System - Charge
735 and 740 Articulated Trucks Hoist System and Brake System Oil Level - Check
735 and 740 Articulated Trucks Hoist System and Brake System Oil - Change
C11 and C13 Engines for Caterpillar Built Machines Inlet Air Temperature Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor - Remove and Install
988H Wheel Loader Machine Systems Demand Fan Valve - Disassemble
C11 and C13 Engines for Caterpillar Built Machines Camshaft Position Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Axle Oscillation Bearings - Lubricate
988H Wheel Loader Machine Systems Demand Fan Valve - Assemble
966H and 972H Wheel Loaders Circuit Breakers - Reset
793D Off-Highway Truck Backup Alarm - Test
789C Off-Highway Truck/Tractor Water Lines (Coolers)
725 and 730 Articulated Trucks Brake Accumulator (Service) - Check
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Gear Pump (Conveyor System Charge, Vibratory) - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.