Conveyor Planetary Drive (Drag) Oil - Change
Note: Perform the following procedure on the two conveyor planetaries.
- Remove drain plug (2). Allow the oil to drain.
- Clean drain plug (2) and reinstall the drain plug.
- Remove oil level check plug (1). Remove the oil filler plug. The oil filler plug is located on the top of the gearbox.
- Fill the conveyor planetary through the oil filler plug until the oil is at the bottom of the hole for oil level check plug (1).
- Clean the oil level check plug and clean the oil filler plug. Install the oil level check plug and install the oil filler plug.
Show/hide table
Illustration 1 | g01127884 |
Caterpillar Information System:
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Final Drive Planetary (Auger Conveyor) - Remove
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Pressure Switch (Refrigerant Pressure Cutoff)
735, 740 and 740 EJECTOR Articulated Trucks Power Train Final Drive and Wheel
854G Wheel Dozer Lubricant Viscosities
AP-1055D and BG-2455D Asphalt Pavers Conveyor Planetary Drive (Auger) Oil Sample - Obtain
AccuGrade - Grade Control System Display Description (Single Sonic System)
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Chain (Auger Conveyor) - Remove and Install
2005/03/14 A New Cover Keeps the Headliner Secure in the Roof of the Cab {7301}
Field Installation of the 235-5738 Backhoe Auxiliary Lines (KIT) (STANDARD STICK){5057} Field Installation of the 235-5738 Backhoe Auxiliary Lines (KIT) (STANDARD STICK){5057}
834H Wheel Dozer and 836H Landfill Compactor Steering System Steering Time - Check and Adjust
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Braking System Hydraulic Oil Contamination - Test
2004/12/20 Special Instruction, REHS2054, "Automatic Lubrication System" Is Available {7540}
Supplemental Parts Information for the USN Seabee IT28G{0600, 1405, 4202, 4209, 5050, 5051, 5067, 5069, 5117, 6402, 7000, 7056} Supplemental Parts Information for the USN Seabee IT28G{0600, 1405, 4202, 4209, 5050, 5051, 5067, 5069, 5117, 6402, 7000, 7056}
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Filter Base - Install
14M and 16M Motor Graders Transmission Pressures - Test and Adjust
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Braking System Brake System Troubleshooting
C7 Engines for Caterpillar Built Machines General Information
735, 740 and 740 EJECTOR Articulated Trucks Power Train Final Drive and Wheel
C7 Engines for Caterpillar Built Machines Electronic Control System Components
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Shutoff Solenoid - Remove and Install
AP-1055D and BG-2455D Asphalt Pavers Conveyor Planetary Drive (Drag) Oil Level - Check
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Auger Conveyor - Remove and Install
AP-1055D and BG-2455D Asphalt Pavers Conveyor Planetary Drive (Drag) Oil Sample - Obtain
AP-1055D and BG-2455D Asphalt Pavers Conveyor System - Inspect