Final Drive and Wheel
Show/hide table
 | |
| 图 1 | g01127870 |
(1) 组装前，橡胶曲面和所有接触表面必须清洁且干燥。 就要安装时，在金属密封件的接触面上涂抹一薄层机油。 组装时润滑所有气体密封件。 密封圈必须正好装在孔中。 不得扭曲 O 形密封圈 。
(2) 润滑密封的接触面。 使用传动系中使用的润滑油。
(3) 8 只螺栓的扭矩 ... 150 ± 20 N·m (110 ± 15 lb ft)
(4) 将 20 只螺栓拧紧至扭矩为 185 ± 20 N·m (135 ± 15 lb ft)。 再转动螺栓 60° ± 10°。
有关安装轴承的步骤，请参阅正维修机器的拆解和组装手册。
Caterpillar Information System:
854G Wheel Dozer Lubricant Viscosities
AP-1055D and BG-2455D Asphalt Pavers Conveyor Planetary Drive (Auger) Oil Sample - Obtain
AccuGrade - Grade Control System Display Description (Single Sonic System)
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Chain (Auger Conveyor) - Remove and Install
2005/03/14 A New Cover Keeps the Headliner Secure in the Roof of the Cab {7301}
Field Installation of the 235-5738 Backhoe Auxiliary Lines (KIT) (STANDARD STICK){5057} Field Installation of the 235-5738 Backhoe Auxiliary Lines (KIT) (STANDARD STICK){5057}
834H Wheel Dozer and 836H Landfill Compactor Steering System Steering Time - Check and Adjust
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Braking System Hydraulic Oil Contamination - Test
2004/12/20 Special Instruction, REHS2054, "Automatic Lubrication System" Is Available {7540}
735, 740 and 740 EJECTOR Articulated Trucks Power Train Differential and Bevel Gear
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Pressure Switch (Refrigerant Pressure Cutoff)
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Final Drive Planetary (Auger Conveyor) - Remove
AP-1055D and BG-2455D Asphalt Pavers Conveyor Planetary Drive (Drag) Oil - Change
Supplemental Parts Information for the USN Seabee IT28G{0600, 1405, 4202, 4209, 5050, 5051, 5067, 5069, 5117, 6402, 7000, 7056} Supplemental Parts Information for the USN Seabee IT28G{0600, 1405, 4202, 4209, 5050, 5051, 5067, 5069, 5117, 6402, 7000, 7056}
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Filter Base - Install
14M and 16M Motor Graders Transmission Pressures - Test and Adjust
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Braking System Brake System Troubleshooting
C7 Engines for Caterpillar Built Machines General Information
735, 740 and 740 EJECTOR Articulated Trucks Power Train Final Drive and Wheel
C7 Engines for Caterpillar Built Machines Electronic Control System Components
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Shutoff Solenoid - Remove and Install
AP-1055D and BG-2455D Asphalt Pavers Conveyor Planetary Drive (Drag) Oil Level - Check