D379B, D398B & D399 GENRERATOR SET ENGINES Caterpillar

1. Disconnect wires from the starting motor and the solenoid.

2. Put identification on wires and terminals for installation.

TYPICAL EXAMPLE

3. Fasten a hoist to starter. Remove the three bolts (1) that hold starter to the flywheel housing. Remove the electric starter. Weight is 80 lb. (36 kg).

Install Electric Starting Motors

TYPICAL EXAMPLE

1. Fasten a hoist and put the starting motor on engine. Install the three bolts.

2. Connect the wires to starting motor and to solenoid.