PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RATING LABEL ON CERTAIN C2.2 POWERED GENERATING SETS
Usage:
REBE6505-00
Show/hide table
| 23Sep2010 |
U-390
Show/hide table
| Priority | PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RATING LABEL ON CERTAIN C2.2 POWERED GENERATING SETS |
|
| 7405 7557 | PI31805 |
|
Show/hide table
| NOTE: | This Program must be administered as soon as possible. When reporting the repair, use "PI31805" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. Exception: If the repair is done after failure, use "PI31805" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
COMPLETION DATE |
TERMINATION DATE |
| 31Mar2011 | 30Sep2011 |
PROBLEM
Show/hide table
| The existing rating label on certain C2.2 powered Generating Sets contains the wrong transient response data associated with the generator. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| C2.2 | GBE00176, 180, 190, 193-194, 196, 199, 202, 241-242, 248-249, 255, 268, 272-273, 283, 297, 302, 305-311, 315, 318, 320, 334, 348, 366, 374, 384, 449-451 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | LABEL | ORDER BY E-MAIL (See Action Required) |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 29% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
ACTION REQUIRED
Show/hide table
| Order a new rating label and replace the existing label with the new label when the new label is received. Ordering a new label: A rating label which displays the correct transient response data can be obtained by sending an e-mail to CPI@cat.com with the following information: 1. Generating Set Serial Number. 2. Engine Serial Number. 3. Generator Serial Number. 4. Mailing address for new rating label. Installation of new rating Label: 1. Remove the old rating label from its location on the Generating set. 2. Clean the surface, ensuring that is clean and free from dust. 3. Remove the backing from the new rating label and apply to the Generating set. |
Show/hide table
OWNER NOTIFICATION
Show/hide table
| U.S. and Canadian owners will receive the attached Owner Notification. |
SERVICE CLAIM ALLOWANCES
Show/hide table
Show/hide table
| NOTE: This is a 1.0-hour job | |||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
| MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE. |
Show/hide table
| COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS XYZ Corporation 3240 Arrow Drive Anywhere, YZ 99999 PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RATING LABEL MODELS INVOLVED - C2.2 POWERED GENERATING SETS Dear Caterpillar Product Owner: The existing rating label contains the wrong transient response data associated with the generator on the products listed below. The existion label will be replaced with a new label with the correct information. You will not be charged for the service performed. Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated 23Sep2010 when scheduling this service. We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime. Caterpillar Inc. Identification #(s) Attached to 23Sep2010 Service Letter |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ENGINE JACKET WATER HEATER ON CERTAIN D13, D20, D25, AND D30 MODEL GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE ENGINE JACKET WATER HEATER ON CERTAIN D13, D20, D25, AND D30 MODEL GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RELAYS ON CERTAIN CAT SWITCHGEAR PRODUCT SUPPORT PROGRAM FOR REPLACING THE RELAYS ON CERTAIN CAT SWITCHGEAR
PRODUCT SUPPORT PROGRAM FOR REPLACING FUEL PRIMING PUMPS ON CERTAIN C4.4 MARINE GENSET ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING FUEL PRIMING PUMPS ON CERTAIN C4.4 MARINE GENSET ENGINES
PRODUCT SUPPORT PROGRAM TO REWORK THE BREAKER OVERLOAD TRIP MODULE ON CERTAIN 3406C, 3412C, C15, AND C18 GENERATOR SETS TO OPERATE ON THERMAL AND SHORT CIRCUIT EVENTS PRODUCT SUPPORT PROGRAM TO REWORK THE BREAKER OVERLOAD TRIP MODULE ON CERTAIN 3406C, 3412C, C15, AND C18 GENERATOR SETS TO OPERATE ON THERMAL AND SHORT CIRCUIT EVENTS
PRODUCT IMPROVEMENT PROGRAM FOR APPLYING RTV TO THE ELECTRONIC THERMOSTAT MOTOR HOUSING AND COVER ON CERTAIN C175-16 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR APPLYING RTV TO THE ELECTRONIC THERMOSTAT MOTOR HOUSING AND COVER ON CERTAIN C175-16 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING 0R0705 AND 0R8766 REMAN WATER PUMPS IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING 0R0705 AND 0R8766 REMAN WATER PUMPS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE GENERATOR HAVING MISALIGNED MOUNTING FEET ON CERTAIN C4.4 AND C6.6 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE GENERATOR HAVING MISALIGNED MOUNTING FEET ON CERTAIN C4.4 AND C6.6 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE 295-8494 INTEGRAL SEAL FROM DEALER INVENTORY PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE 295-8494 INTEGRAL SEAL FROM DEALER INVENTORY
PRODUCT SUPPORT PROGRAM FOR INSTALLATION OF NEW TURBOCHARGERS ON CERTAIN C9 ENGINES INSTALLED IN DOOSAN COMPRESSORS PRODUCT SUPPORT PROGRAM FOR INSTALLATION OF NEW TURBOCHARGERS ON CERTAIN C9 ENGINES INSTALLED IN DOOSAN COMPRESSORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING AIR CONDITIONER COMPRESSOR SUPPORT HARDWARE ON CERTAIN C15 AND C18 COMMERCIAL ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING AIR CONDITIONER COMPRESSOR SUPPORT HARDWARE ON CERTAIN C15 AND C18 COMMERCIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DAMPER FASTENER GROUP ON CERTAIN C175-16 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DAMPER FASTENER GROUP ON CERTAIN C175-16 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE IMPROVED DOOR SEAL AND BUTTON HEAD SCREWS ON CERTAIN CAT XQ30, XQ45, XQ60, XQ80, XQ100, AND XQ175 COMPACT RENTAL GENSETS PRODUCT SUPPORT PROGRAM FOR INSTALLING THE IMPROVED DOOR SEAL AND BUTTON HEAD SCREWS ON CERTAIN CAT XQ30, XQ45, XQ60, XQ80, XQ100, AND XQ175 COMPACT RENTAL GENSETS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING FITTINGS ON CERTAIN C18 MARINE ENGINES EQUIPPED WITH DUPLEX FUEL FILTERS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING FITTINGS ON CERTAIN C18 MARINE ENGINES EQUIPPED WITH DUPLEX FUEL FILTERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW OFF ENGINE FUEL LIFT PUMP ASSEMBLY ON CERTAIN C3.3 AND C4.4 CAT BRANDED OLYMPIAN GENSETS PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW OFF ENGINE FUEL LIFT PUMP ASSEMBLY ON CERTAIN C3.3 AND C4.4 CAT BRANDED OLYMPIAN GENSETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER COMPRESSOR OUTLET PIPING AND SEALS ON CERTAIN G3516E, 3520C, AND 3520E GENERATOR SET ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER COMPRESSOR OUTLET PIPING AND SEALS ON CERTAIN G3516E, 3520C, AND 3520E GENERATOR SET ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED HINGES ON CERTAIN 345C, 345D, AND 385C EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED HINGES ON CERTAIN 345C, 345D, AND 385C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL LINES ON CERTAIN C32 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL LINES ON CERTAIN C32 MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL LINES ON CERTAIN C32 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL LINES ON CERTAIN C32 MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING PISTON RINGS ON CERTAIN C12, C18, AND 3406C MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING PISTON RINGS ON CERTAIN C12, C18, AND 3406C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A WATER-COOLED THROTTLE ON CERTAIN G3516C, G3520C, G3516E, AND G3520E ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING A WATER-COOLED THROTTLE ON CERTAIN G3516C, G3520C, G3516E, AND G3520E ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR FILTER ASSEMBLY ON CERTAIN C2.2 GENERATING SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR FILTER ASSEMBLY ON CERTAIN C2.2 GENERATING SETS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN PRESSURE SWITCHES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN PRESSURE SWITCHES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MUFFLER EXHAUST OUTLET ON CERTAIN 345D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE MUFFLER EXHAUST OUTLET ON CERTAIN 345D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN C175-16 OIL PAN GASKETS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN C175-16 OIL PAN GASKETS FROM DEALER PARTS STOCK