Final Drive Planetary Carrier - Assemble
组装步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 2P-8312 | 挡圈钳 | 1 |
- 清洁并检查所有零件。 如果任何零件磨损或损坏，则应使用 Caterpillar 新件进行更换。
- 将两个滚柱轴承 (8) 安装到齿轮 (5) 上。 将四个垫圈 (7) 和 (6) 安装在齿轮 (5) 上。 对其他两个齿轮重复上述步骤。
Show/hide table
 | |
| 图 1 | g00453696 |
- 将齿轮 (5) 和轴 (2) 安装到终传动 (4) 上。 对其他两个齿轮重复上述步骤。 将 O 形密封圈 (3) 安装到终传动 (4) 上。 由两个人翻转终传动。 终传动的重量为 42 kg (93 lb)。
Show/hide table
 | |
| 图 2 | g00453695 |
- 使用工具 (A) 将挡圈 (1) 安装到轴 (2) 上。 对其他两个轴重复上述步骤。
Show/hide table
 | |
| 图 3 | g00453694 |
End By: 安装终传动和车轮。 请参阅 拆解和组装, "终传动和车轮 - 安装"。
Caterpillar Information System:
R1300G Load Haul Dump Power Train Final Drive Planetary Carrier - Disassemble
R2900G Load Haul Dump Braking System Parking Brake (Automatic Function)
R1600G Load Haul Dump Power Train Electronic Control System Cat Data Link
R1600G Load Haul Dump Power Train Electronic Control System System Schematic
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Alert Indicators
TH220B and TH330B Telehandlers Power Train Drive and Steering Axle (Rear) - Install
2003/11/10 Latest Version of Payload Control System (PCS) Software Is Now Available {7620}
216B2, 226B2, 232B2 and 242B2 Skid Steer Loaders Machine Systems Tire and Rim
24H Motor Grader Hydraulic and Steering System Pump Control Valve - Test and Adjust
C9 Engines for Caterpillar Built Machines Camshaft - Install
C9 Engine For Caterpillar Built Machines Camshaft - Remove
CP-323C and CS-323C Vibratory Compactors Machine Systems Articulating and Oscillating Hitch - Install
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Piston Pump (Brake, Hoist, Fan) - Test and Adjust
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Electric Drive Pump (Secondary Steering) - Check
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Relief Valve (Hoist Lower) - Test and Adjust
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Mechanical Noise (Knock) in Engine
2003/11/17 New Gasket for the Turbocharger's Water Lines {1052, 1380}
2003/11/01 New Gasket for the Turbocharger's Water Lines {1052, 1380}
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Interlock Electronic Control System Indicators
2003/12/15 New Gaskets in the Water Lines Groups {1380}
2003/12/01 New Gaskets in the Water Lines Groups {1380}
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train Steering Cylinder - Remove and Install
725 and 730 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Pressure Reducing Valve (Hoist Pilot Pressure) - Test and Adjust
CP-323C and CS-323C Vibratory Compactors Machine Systems Rollover Protective Structure (ROPS) - Remove and Install