R2900G Load Haul Dump Braking System Caterpillar


Brake Release Cylinder

Usage:

R2900G GLK


图 1g01057801
抢修杆制动器释放系统


图 2g00905776
抢修钩制动器释放系统

制动器释放油缸位于机器后部。

制动器释放系统通过两种方法启用:固定在抢修机器上的抢修杆或固定在停用机器抢修钩上的牵引索。 两种方法均能对制动器释放油缸中的活塞施加外力。



图 3g01031726
制动器释放油缸
(1) 弹簧
(2) 腔室
(3) 端口
(4) 油道
(5) 密封件
(6) 端口
(7) 活塞杆

油从液压油箱回油系统输送到制动器释放系统。 这部分油经过端口 (6) 和油道 (4) 流入腔室 (2)。 施加在活塞杆 (7) 上的外力将启用制动器释放系统。 从而使活塞杆 (7) 克服弹簧 (1) 移动。 密封件 (5) 移过油道 (4) 时,腔室 (2) 中的油通过端口 (3) 被推压至停车制动器。

消除活塞杆 (7) 上的外力时,弹簧 (1) 将向下移动活塞杆 (7)。 油从停车制动器经端口 (3) 回流至腔室 (2)。

Caterpillar Information System:

2003/11/10 Flash Files are Now Available in SIS for Track Feller Bunchers {7620}
247B and 257B Multi Terrain Loaders Machine Systems Bogie Wheel
TH220B and TH330B Telehandlers Power Train Transmission and Torque Converter - Install
2004/06/07 A New Track Roller is Available for the Cold Planer {4180}
2005/02/21 A Clamp Increases the Sealing Capability of the Coolant Bypass Tube {1380}
2003/12/01 Arctic Cartridge Pins Are Available {7217}
2003/12/01 New Fuel Filter Base Has Been Released {1262}
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Brake Reservoir Oil Level - Check
789C Off-Highway Truck Daily Inspection
2004/02/23 Correction to Disassembly and Assembly , "Tandem and Cover - Remove and Install" {4064}
3508B Engine for Caterpillar Built Machines Elevated Low Idle Operation
2004/02/23 Correction to Disassembly and Assembly , "Tandem and Cover - Remove and Install" {4064}
R1600G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0679 - FMI 03
R1600G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0679 - FMI 05
R1600G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0679 - FMI 06
R2900G Load Haul Dump Braking System Pressure Switch (Residual Brake Oil)
R1600G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0668 - FMI 02
R2900G Load Haul Dump Braking System Sequence Valve (Brake Release)
R1600G Load Haul Dump Power Train Electronic Control System MID 081 - CID 0687 - FMI 02
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System System Schematic
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Equipment Lowering with Engine Stopped - Pilot Controls
2003/11/03 Correction to Disassembly and Assembly, RENR5186 , "Tire and Rim - Remove and Install" {4202}
584 and 584HD Forwarders Guards - Operator Protection
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System Switches
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.