Differential and Final Drive Oil Sample - Obtain
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Operate the machine for a few minutes before obtaining the oil sample. This will thoroughly mix the oil for a more accurate sample.
Show/hide table
Illustration 1 g00535224 Front Differential Filler Plug Show/hide table
Illustration 2 g00535225 Rear Differential Filler Plug Show/hide table
Illustration 3 g00760182 Final Drive Filler Plug - The differential and final drives are not equipped with sampling valves. Obtaining an oil sample will require the use of a vacuum pump or equivalent in order to extract the oil from the component. Extract the oil through the filler openings on the differential and final drives.
Reference: For more information, refer to Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations" and Special Publication, PEHP6001, "How To Take A Good Oil Sample".
Caterpillar Information System:
TH220B and TH330B Telehandlers Machine Systems Control Valve (Trailer and Towing Hitch) - Remove
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Engine Oil Sample - Obtain
2003/10/20 Improved Water Pump Seal {1361}
CP-533E and CS-533E Vibratory Soil Compactors Machine Systems Metering Pump (Steering)
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Cooling System Coolant Level - Check
Assembly Instruction for the New 3400 Oil Pump Body Serviced Assembly{1304} Assembly Instruction for the New 3400 Oil Pump Body Serviced Assembly{1304}
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System Setup Mode
416D Backhoe Loader Lubricant Viscosities
12H Motor Grader Engine Supplement Rear Chassis Support - Install
12H Motor Grader Engine Supplement Rear Chassis Support - Remove
CP-533E and CS-533E Vibratory Soil Compactors Machine Systems Gear Pump (Steering)
2003/08/25 Correct Identification of Service Parts for the 222-5689 Bogie Wheel Gp {4192}
824G Series II Wheel Dozer, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Electrohydraulic System Hydraulic Fan System - Reversing Fan
572R Series II Pipelayer Hydraulic System Visual Inspection
572R Series II Pipelayer Hydraulic System Hydraulic Pump Efficiency - Test
572R Series II Pipelayer Hydraulic System Accumulator (Pilot) - Test and Charge
572R Series II Pipelayer Hydraulic System Main Relief Valve - Test and Adjust
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems Piston Pump (Saw) - Install
572R Series II Pipelayer Hydraulic System Combination Valve - Test and Adjust
2003/09/15 New Auger Motors and Feeder Motors are Now Used {5058}
572R Series II Pipelayer Hydraulic System Boom Kickout Valve - Test and Adjust
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Transmission Oil Sample - Obtain
572R Series II Pipelayer Hydraulic System Counterweight Relief Valve - Test and Adjust
12H Motor Grader Engine Supplement Air Compressor - Remove and Install