Control Valve (Trailer and Towing Hitch) - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
ZZ     | 9U-7076     | Face Seal Plug     | 2     |
9U-7077 | Face Seal Plug     | 4     | |
6V-9507 | Face Seal Plug     | 1     | |
6V-9508 | Face Seal Plug     | 1     | |
6V-9509 | Face Seal Plug     | 2     | |
6V-9529 | Face Seal Plug     | 1     | |
6V-9828 | Face Seal Plug     | 1     | |
6V-9829 | Face Seal Plug     | 1     |
Start By:
- Release hydraulic pressure. Refer to Disassembly and Assembly, "Hydraulic Pressure - Release".
- Remove the towing hitch. Refer to Disassembly and Assembly, "Towing Hitch - Remove".
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
- Put identification marks on all hoses for installation purposes. Plug all hoses. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
- Remove tube assemblies (1) .
Show/hide table
Illustration 1 | g01020002 |
- Disconnect harness assemblies (2) .
Show/hide table
Illustration 2 | g01020011 |
- Remove bolts (3). Remove plate (4) .
Show/hide table
Illustration 3 | g01020014 |
- Remove fittings (5). Remove bolts (6). Remove control valve (7) .
Show/hide table
Illustration 4 | g01020015 |
Caterpillar Information System:
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Engine Oil Sample - Obtain
2003/10/20 Improved Water Pump Seal {1361}
CP-533E and CS-533E Vibratory Soil Compactors Machine Systems Metering Pump (Steering)
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Cooling System Coolant Level - Check
Assembly Instruction for the New 3400 Oil Pump Body Serviced Assembly{1304} Assembly Instruction for the New 3400 Oil Pump Body Serviced Assembly{1304}
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Caterpillar Monitoring System Setup Mode
416D Backhoe Loader Lubricant Viscosities
12H Motor Grader Engine Supplement Rear Chassis Support - Install
12H Motor Grader Engine Supplement Rear Chassis Support - Remove
CP-533E and CS-533E Vibratory Soil Compactors Machine Systems Gear Pump (Steering)
2003/08/25 Correct Identification of Service Parts for the 222-5689 Bogie Wheel Gp {4192}
120H and 135H Motor Graders 3126B Engine Supplement Air Cleaner - Remove and Install
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Differential and Final Drive Oil Sample - Obtain
824G Series II Wheel Dozer, 825G Series II Soil Compactor and 826G Series II Landfill Compactor Electrohydraulic System Hydraulic Fan System - Reversing Fan
572R Series II Pipelayer Hydraulic System Visual Inspection
572R Series II Pipelayer Hydraulic System Hydraulic Pump Efficiency - Test
572R Series II Pipelayer Hydraulic System Accumulator (Pilot) - Test and Charge
572R Series II Pipelayer Hydraulic System Main Relief Valve - Test and Adjust
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems Piston Pump (Saw) - Install
572R Series II Pipelayer Hydraulic System Combination Valve - Test and Adjust
2003/09/15 New Auger Motors and Feeder Motors are Now Used {5058}
572R Series II Pipelayer Hydraulic System Boom Kickout Valve - Test and Adjust
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Transmission Oil Sample - Obtain
572R Series II Pipelayer Hydraulic System Counterweight Relief Valve - Test and Adjust