Load Haul Dump Power Train Caterpillar

Torque Converter

Usage:

R2900G GLK

Show/hide table




Illustration 1	g01062729

Show/hide table




Illustration 2	g01062730

Show/hide table

Table 1
Clearance Between Components		Clearance Across the Diameter
(1) Turbine and converter housing	New	2.67 ± 0.38 mm (0.105 ± 0.015 inch)
(1) Turbine and converter housing	Maximum worn	4.001 mm (0.1575 inch)
(2) Stator and turbine	New	0.81 ± 0.10 mm (0.032 ± 0.004 inch)
(2) Stator and turbine	Maximum worn	1.22 mm (0.048 inch)
(3) Stator and impeller	New	0.81 ± 0.10 mm (0.032 ± 0.004 inch)
(3) Stator and impeller	Maximum worn	1.22 mm (0.048 inch)
(4) Hub and bearing in spider assembly	New	0.114 ± 0.051 mm (0.0045 ± 0.0020 inch)
(5) Hub and bearing in carrier assembly	New	0.147 ± 0.038 mm (0.0058 ± 0.0015 inch)
(6) Impeller hub and bearing carrier	New	0.20 ± 0.05 mm (0.008 ± 0.002 inch)

(7) Torque for 20 bolts ... 50 ± 7 N·m (37± 5 lb ft)

(8) After assembly, carrier assembly end play must be ... 1.2 ± 1 mm (0.05 ± 0.04 inch)

(9) Torque for 12 bolts ... 120 ± 15 N·m (90 ± 11 lb ft)

(10) Torque for 12 bolts ... 50 ± 7 N·m (37± 5 lb ft)

(11) Torque for 36 bolts ... 50 ± 7 N·m (37± 5 lb ft)

(12) Torque for 12 bolts ... 50 ± 7 N·m (37± 5 lb ft)

Caterpillar Information System:

R1600G Load Haul Dump Lubricant Viscosities

R1700G Load Haul Dump Air Conditioning and Heating Control

R1600G Load Haul Dump Model Views and Specifications

R1600G Load Haul Dump Safety Messages

143H and 163H Motor Graders Machine Systems Blade Lift Arm - Install

143H and 163H Motor Graders Machine Systems Blade Lift Arm - Remove

2003/07/28 A New Idler Pulley is Used {1234}

TH220B and TH330B Telehandlers Engine Supplement Engine - Install

416D, 420D and 430D Backhoe Loaders Axles, Differential and Brakes Axle (Front)

CP-533E and CS-533E Vibratory Soil Compactors Machine Systems Electrical System

CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Vibratory Electrical System

3126B Machine Engines Throttle Switch Circuit - Test

R2900G Load Haul Dump Steering System Diverter Valve (Secondary Steering)

R1600G Load Haul Dump Service Inspection

2003/08/01 A Previous High Temperature Locknut is Used in Engine Exhaust System Groups {7553}

247B, 257B, 267B, 277B and 287B Multi Terrain Loaders Safety Messages

2003/07/21 A New Fuel Priming Pump Is Used on the Wheel Feller Bunchers and the Wheel Skidders {1258}

R1600G Load Haul Dump Rear Axle Trunnion Bearings - Lubricate

R1600G Load Haul Dump Steering Cylinder Bearings - Lubricate

R1600G Load Haul Dump Articulated Hitch Bearings - Lubricate

R1600G Load Haul Dump Walk-Around Inspection

R2900G Load Haul Dump Steering System Relief Valve (Steering Cylinder Crossover)

R2900G Load Haul Dump Steering System Control Valve (Wheel Steering)

R2900G Load Haul Dump Steering System Control Valve (STIC Steering)