Illustration 1 | g01013048 |
(1) Torque for the locknut of the steering stop bolt. ... 150 N·m (110 lb ft)
Note: Apply 154-9731 Thread Lock Compound to the threads of the bolt for the steering stop.
(3) Torque for locknut ... 250 N·m (185 lb ft)
(4) Torque for the ball joint ... 300 N·m (220 lb ft)
(5) Torque for 6 bolts ... 460 N·m (340 lb ft)
(6) Torque for the 2 tie rod nuts ... 220 N·m (162 lb ft)
(7) Torque for the 16 bolts ... 300 N·m (221 lb ft)
(8) Torque for the 2 plugs ... 15 N·m (11 lb ft)
(9) Torque for the 6 bolts ... 120 N·m (89 lb ft)
Note: Apply 154-9731 Thread Lock Compound to the threads prior to installing the bolts.
Note: Refer to Testing and Adjusting, "Axle Housing and Bearing Preload - Adjust" for the required quantity of shims.
(10) Thickness of the shim ... 0.15 mm (0.0059 inch)
(11) Thickness of the shim ... 0.20 mm (0.0079 inch)
(12) Thickness of the shim ... 0.50 mm (0.0197 inch)
Note: Each pair of shims must be assembled in a cross pattern.