Hood - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 4     |
- Attach Tooling (A) and a suitable lifting device, as shown. Install hood assembly (13). The weight of hood assembly (13) is approximately 159 kg (350 lb).
Show/hide table
Illustration 1 | g00939273 |
- Attach Tooling (A) and a suitable lifting device, as shown. Install cover (12) and bolts (11). The weight of cover (12) is approximately 41 kg (90 lb).
Show/hide table
Illustration 2 | g00939274 |
- Install bolts (10) .
Show/hide table
Illustration 3 | g00939275 |
- Install bolt (9) .
Show/hide table
Illustration 4 | g00939276 |
- Repeat Step 4 for the opposite side.
- Install bolt (7) on angle (8) .
Show/hide table
Illustration 5 | g00939314 |
- Repeat Step 6 for the opposite side.
- Install bolts (6) and (5) .
Show/hide table
Illustration 6 | g00939316 |
- Install clamp (4) and bolts (3) .
Show/hide table
Illustration 7 | g00939318 |
- Install right door assembly (2) and left door assembly (1) .
Show/hide table
Illustration 8 | g00938710 |
Show/hide table
Illustration 9 | g00938708 |
Caterpillar Information System:
TH350B, TH355B, TH360B and TH460B Telehandlers Differential Oil - Change
TH210 and TH215 Telehandlers Machine Systems Fuel Tank - Install
2002/12/09 The Cap on the Directional Control Valve is now Serviced {5051}
574B Forwarder Hydraulic System Fuel Level Sender - Calibrate
HF181, HF201, HF202, HF221 and HF222 Felling Heads Felling Head Tooth Holder - Remove and Install - If Equipped
AP-655C and BG-2255C Asphalt Pavers Drag Conveyor and Auger Conveyor Systems Auger Conveyor System
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders Two Lever Control (Backhoe)(Universal Pattern)
A Basic Guide for Users of the Caterpillar Machine Security System (MSS){7631} A Basic Guide for Users of the Caterpillar Machine Security System (MSS){7631}
554 and 574 Forwarders Power Train Piston Pump (Hydraulic Neutral Adjustment) - Test and Adjust
554 and 574 Forwarders Power Train Brake System Air - Purge
554 and 574 Forwarders Power Train Brake Disc Wear - Check
554 and 574 Forwarders Power Train Brake Cylinder Stroke - Test and Adjust
HF202 Felling Head, HF221 Felling Head and HF222 Felling Head for Wheel Feller Bunchers Felling Head Mounting - Remove
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Caterpillar Monitoring System for AP Warning Operation
Field Installation of the 223-8415 Installation Arrangement (Air Conditioner and Heater) {7304, 7320} Field Installation of the 223-8415 Installation Arrangement (Air Conditioner and Heater) {7304, 7320}
570B and 580B Wheel Harvesters Machine Systems Pressure Reducing Valve (Swing Motor Back Pressure) - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0668 - FMI 02
570B and 580B Wheel Harvesters Machine Systems Pressure Reducing Valve (Swing Motor Back Pressure) - Install
8B and 10B Pavemaster Screed Screed Plates
533 and 543 Wheel Feller Bunchers Engine Supplement Hood Side Panels and Side Doors - Install
735 Articulated Truck Safety Messages
570B and 580B Wheel Harvesters Machine Systems Control Valve (Swing Brake) - Remove
570B and 580B Wheel Harvesters Machine Systems Control Valve (Swing Brake) - Install
8B and 10B Pavemaster Screed Screed Extensions