Water Temperature Regulators - Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Number | Qty |
| A | 439-3938 | Link Bracket | 2 |
| B | 221-8647 | Driver | 1 |
| C | FT-3578 | Driver As | 1 |
| D | 1S-0258 | Plastic Hammer As | 1 |
- Use Tooling (C) and (D) to install vent valve (9).
Show/hide table
Illustration 2 g00928147 - Install seal (8) to Tooling (B).
- Use Tooling (B) to install seal (8) to regulator housing (4).
Show/hide table
Illustration 3 g06122794 - Install gasket (7) and water temperature regulators (6) to regulator housing (4).
Show/hide table
Illustration 4 g00934949 - Attach Tooling (A) and a suitable lifting device to regulator housing (4) and position regulator housing (4) to the engine. The weight of regulator housing (4) is approximately
59 kg (130 lb) . Install bolts (5).Show/hide table
Illustration 5 g00928067 - Connect tube assemblies (3) to regulator housing (4).
Show/hide table
Illustration 6 g00928042 - Install elbow (2) and the gasket. Install tube assembly (1).
- Fill the cooling system. Refer to Operation and Maintenance Manual, SEBU7651, "Cooling System Coolant (DEAC) - Change" or Operation and Maintenance Manual, SEBU7651, "Cooling System Coolant (ELC) - Change".
Show/hide table
| |
| Illustration 1 | g06122796 |
Caterpillar Information System:
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Service Brakes
574B Forwarder Hydraulic System Hydraulic Cylinder (Steering)
R2900 Load Haul Dump Hydraulic System Oil Level - Check
R2900 Load Haul Dump Hydraulic System Oil Filter - Replace
R2900 Load Haul Dump Hydraulic System Oil - Change
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Backup Alarm Circuit
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Brake Control Valve (Service)
D350E and D400E Articulated Trucks Power Train Rear Drive Shaft
2002/10/21 New Electronic Control Modules Used on Machine Engines {1901}
D250E and D300E Articulated Trucks Power Train Rear Axle
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Charging Circuit
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Control Valve (Shift)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Machine Systems Steering, Fan and Leveling Blade System
2002/10/28 A New Water Lines Group Is Used On The Turbochargers {1052}
C-9 Engine for Caterpillar Built Machines Ether Injection System - Test
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1703 - FMI 03
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Axle
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Engine Starting Circuit
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Final Drive Planetary (Drum Propel)
14H Motor Grader Machine Systems Blade - Remove
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1703 - FMI 05
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 1703 - FMI 06
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Piston Pump (Axle Propel and Drum Propel)
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Final Drive Planetary (Axle Propel)