Rear Axle
Show/hide table
Illustration 1 | g00928074 |
(1) After installation, fill the square drive with a polyester type automotive body filler.
(2) Torque the 16 bolts to 160 ± 40 N·m (120.0 ± 30.0 lb ft). Then, turn each bolt 115 to 125 degrees.
(3) Before you assemble the yoke, apply 6V-6640 Sealant to the end of the pinion shaft.
(4) Torque for the bolt ... 135 ± 20 N·m (100.0 ± 15.0 lb ft)
Caterpillar Information System:
R2900 Load Haul Dump Hydraulic Line Screen - Clean
R2900 Load Haul Dump Fuses - Replace
R2900 Load Haul Dump Fuel Tank Water and Sediment - Drain
D250E and D300E Articulated Trucks Power Train Center Axle
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Foot Brake Control
3524B Engine for Caterpillar Built Machines Water Temperature Regulators - Remove
R2900 Load Haul Dump Fuel Tank Cap and Strainer - Clean
R2900 Load Haul Dump Fuel System Water Separator - Drain
D250E and D300E Articulated Trucks Power Train Center Axle
797 Off-Highway Truck Fan Drive Hydraulic System Fan - Calibrate
D350E and D400E Articulated Trucks Power Train Hitch Drive Shaft
R2900 Load Haul Dump Fuel System Secondary Filter - Replace
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Control Valve (Shift)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Charging Circuit
D250E and D300E Articulated Trucks Power Train Rear Axle
2002/10/21 New Electronic Control Modules Used on Machine Engines {1901}
D350E and D400E Articulated Trucks Power Train Rear Drive Shaft
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Brake Control Valve (Service)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Backup Alarm Circuit
R2900 Load Haul Dump Hydraulic System Oil - Change
R2900 Load Haul Dump Hydraulic System Oil Filter - Replace
R2900 Load Haul Dump Hydraulic System Oil Level - Check
574B Forwarder Hydraulic System Hydraulic Cylinder (Steering)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Service Brakes