Foot Brake Control
Foot Brake Base (Left Hand Pedal)
Show/hide table
Illustration 1 | g00928054 |
Foot Brake Base (Left Hand Pedal) (1) plug (2) Adjustment screw (stop light) (3) Position sensor (4) Limit switch (stop light) (5) Position sensor |
(1) Torque for the plug ... 7.6 ± 0.25 N·m (67 ± 2 lb in)
(5) Apply 4C-4030 Thread Lock Compound to the bolts prior to assembly. Torque for the two bolts ... 2.25 ± 0.25 N·m (20 ± 2 lb in)
Foot Brake Base (Right Hand Pedal)
Show/hide table
Illustration 2 | g00928089 |
Foot Brake Base (Right Hand Pedal) |
(6) Apply 7M-7456 Bearing Mount Compound to the studs before assembling to the base of the cab (if equipped).
(7) Torque for the two studs (if equipped) ... 17 ± 3 N·m (13 ± 2 lb ft)
(B) Angle of the foot brake pedal in the RELEASED position ... 45 ± 1 degrees
Caterpillar Information System:
3524B Engine for Caterpillar Built Machines Water Temperature Regulators - Remove
R2900 Load Haul Dump Fuel Tank Cap and Strainer - Clean
R2900 Load Haul Dump Fuel System Water Separator - Drain
D250E and D300E Articulated Trucks Power Train Center Axle
797 Off-Highway Truck Fan Drive Hydraulic System Fan - Calibrate
D350E and D400E Articulated Trucks Power Train Hitch Drive Shaft
R2900 Load Haul Dump Fuel System Secondary Filter - Replace
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Accumulator Charging Valve (Brake)
D250E and D300E Articulated Trucks Power Train Front Axle
C9 On-Highway Engines Lubrication System
D350E and D400E Articulated Trucks Power Train Front Drive Shaft
D250E and D300E Articulated Trucks Power Train Transfer Gear Group
D250E and D300E Articulated Trucks Power Train Center Axle
R2900 Load Haul Dump Fuel Tank Water and Sediment - Drain
R2900 Load Haul Dump Fuses - Replace
R2900 Load Haul Dump Hydraulic Line Screen - Clean
D250E and D300E Articulated Trucks Power Train Rear Axle
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Control Valve (Shift)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Charging Circuit
D250E and D300E Articulated Trucks Power Train Rear Axle
2002/10/21 New Electronic Control Modules Used on Machine Engines {1901}
D350E and D400E Articulated Trucks Power Train Rear Drive Shaft
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Brake Control Valve (Service)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Backup Alarm Circuit