Water Temperature Regulators - Remove
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 439-3938 | Link Bracket | 2 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant. Refer to Operation and Maintenance Manual, SEBU7651, "Cooling System Coolant (DEAC) - Change" or Operation and Maintenance Manual, SEBU7651, "Cooling System Coolant (ELC) - Change". The cooling system has a capacity of
1195 L (315 US gal) .Show/hide table
Illustration 1 g00928042 - Remove tube assembly (1), elbow (2), and the gasket.
Show/hide table
Illustration 2 g00928067 - Disconnect tube assemblies (3) from regulator housing (4).
Show/hide table
Illustration 3 g00934949 - Attach Tooling (A) and a suitable lifting device to regulator housing (4). Remove bolts (5) to remove regulator housing (4). The weight of regulator housing (4) is approximately
59 kg (130 lb) .Show/hide table
Illustration 4 g06122794 - Remove water temperature regulators (6) and gasket (7) from regulator housing (4). Remove seals (8).
Show/hide table
Illustration 5 g06122796 - Remove vent valve (9).
Caterpillar Information System:
R2900 Load Haul Dump Fuel Tank Cap and Strainer - Clean
R2900 Load Haul Dump Fuel System Water Separator - Drain
D250E and D300E Articulated Trucks Power Train Center Axle
797 Off-Highway Truck Fan Drive Hydraulic System Fan - Calibrate
D350E and D400E Articulated Trucks Power Train Hitch Drive Shaft
R2900 Load Haul Dump Fuel System Secondary Filter - Replace
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Accumulator Charging Valve (Brake)
D250E and D300E Articulated Trucks Power Train Front Axle
C9 On-Highway Engines Lubrication System
D350E and D400E Articulated Trucks Power Train Front Drive Shaft
D250E and D300E Articulated Trucks Power Train Transfer Gear Group
TH340B, TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Load Control Valve (Tilt Cylinder) - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Foot Brake Control
D250E and D300E Articulated Trucks Power Train Center Axle
R2900 Load Haul Dump Fuel Tank Water and Sediment - Drain
R2900 Load Haul Dump Fuses - Replace
R2900 Load Haul Dump Hydraulic Line Screen - Clean
D250E and D300E Articulated Trucks Power Train Rear Axle
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Control Valve (Shift)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Charging Circuit
D250E and D300E Articulated Trucks Power Train Rear Axle
2002/10/21 New Electronic Control Modules Used on Machine Engines {1901}
D350E and D400E Articulated Trucks Power Train Rear Drive Shaft
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Braking System Brake Control Valve (Service)