Usage:
IT38G (7BS, 1CW) Integrated Toolcarriers, 938G (4YS, 6WS, 8RS, 9HS) Wheel Loaders
Reference: Service Manual Module, SENR6719-01, Specifications Systems Operation Testing and Adjusting, 938G Wheel Loader and IT38G Integrated Toolcarrier Traction Control System; Page 31,"CID 609, 610, 611, 612 And 613 Procedure (Traction Control System Solenoids)". This module is found in Service Manual, SENR6780, 938G Wheel Loader and IT38G Integrated Toolcarrier, Volume II.
On Page 31, step two, the resistance specified for the On/Off Pilot Solenoid is incorrect. This should be corrected to read as follows:
For the on/off pilot solenoid, the correct harness circuit resistance is between 32 and 36 ohms.
On Page 31, step two, the resistance specified for the Proportional Solenoid is incorrect. This should be corrected to read as follows:
For the proportional solenoid, the correct harness circuit resistance is between 7 and 12 ohms.