3500 Engines Caterpillar


Housing (Front)

Usage:

3512C ED4


图 1g02639598
后视图

表 1
技术规格 - 375-3660 前壳体总成 
项目  数量  零件  技术规格说明 
2A-5220 塞  拧紧至扭矩为 25 ± 5 N·m (221 ± 44 lb in)。 
安装后,调整垫片与端面 (2) 平齐。 

Caterpillar Information System:

G3406 Engine Engine Mounts - Inspect
CG137-08 and CG137-12 Engines Electric Starting Motor - Remove and Install
349F and 352F Excavators Machine System Specifications Sprocket
3500C Marine Engines Crankshaft
349F and 352F Excavators Machine System Specifications Fasteners - Swing Drive and Motor
3500B and 3500C Marine Engines Duplex Engine Oil Filters
3500 Engines Air Lines
3500 Engines Air Lines
G3406 Engine Crankcase Blowby - Test/Record
2011/07/22 Improved Caterpillar Digital Voltage Regulator (CDVR) Is Used for Certain C9, C15, C18, 3300, 3400, G3400, C27, C32, 3500, G3500, and C175 Engines {4467}
G3406 Engine Maintenance Interval Schedule - Turbocharged Aftercooled Engines
G3406 Engine Maintenance Interval Schedule - Naturally Aspirated Engines
3500C Marine Engines Gear Group (Front)
2011/10/06 Warning Film Is Available for the High Pressure Fuel Pump on C175-16 Engines {1251, 1290, 7405}
G3406 Engine Fuel Filter Differential Pressure - Check
CG137-08 and CG137-12 Industrial Engines Speed/Timing (Primary) - Test
CG137-08 and CG137-12 Engines Gas Pressure Regulator - Remove and Install
G3406 Engine Spark Plugs - Inspect/Adjust/Replace
2011/09/12 A New Gasket and a New Spacer Plate are Now Used on Certain Reman 3500 Engines {1100, 1201, 7555}
2011/07/14 Glow Plugs on Certain C6.6 Engines {1412}
CG137-08 and CG137-12 Industrial Engines Speed/Timing (Secondary) - Test
Repair Procedure for Damaged Harness Wiring {1408} Repair Procedure for Damaged Harness Wiring {1408}
345B Excavator Machine System Specifications Track Roller Mounting
C11, C13, and C15 On-highway Engines Maintenance Interval Schedule - C11 , C13 , and C15 Engines with Standard (Deep) Oil Sumps
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.