A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274} Caterpillar


A New Torque Value Is Used for the Fuel Pressure Regulator Valves on Certain Diesel Engines{1251, 1262, 1274}

Usage:

C-12 2KS
Articulated Truck:
725 (S/N: B1L1-UP)
730 (S/N: B1M1-UP)
730 EJECTOR (S/N: B1W1-UP)
735 (S/N: B1N1-UP)
740 (S/N: B1P1-UP)
740 EJECTOR (S/N: B1R1-UP)
Backhoe Loader:
416E (S/N: SHA1-UP)
Cold Planer:
PM-200 (S/N: P1C1-UP)
Landfill Compactor:
816F (S/N: BMR1-UP)
826G Series II (S/N: AYH1-UP)
826H (S/N: AWF1-UP)
836G (S/N: BRL1-UP; 7MZ1-UP)
836H (S/N: BXD1-UP)
Soil Compactor:
815F (S/N: BKL1-UP)
825H (S/N: AZW1-UP)
Engine:
3508B (S/N: CBB1-UP)
C-10 (S/N: 3CS1-UP; BCX1-UP)
C-12 (S/N: CPD1-UP; 8YF1-UP; BDL1-UP; 2KS1-UP)
C-15 (S/N: 6NZ1-UP; 9NZ1-UP)
C-16 (S/N: 7CZ1-UP)
C-18 (S/N: MDP1-UP)
C11 (S/N: KCA1-UP)
C13 (S/N: KCB1-UP; LEE1-UP; JAM1-UP)
C15 (S/N: SDP1-UP; B5R1-UP; MXS1-UP; NXS1-UP)
C18 (S/N: EJG1-UP)
C4.4 (S/N: 4441-UP)
Generator Set:
3406C GEN SET (S/N: C5G1-UP)
3456 GEN SET (S/N: CCB1-UP; C1G1-UP; C3G1-UP; C4G1-UP; CAH1-UP; CBX1-UP)
C15 GEN SET (S/N: C5E1-UP; STG1-UP; C5H1-UP; C5L1-UP; X4R1-UP)
C18 GEN SET (S/N: C6C1-UP; G4C1-UP; STD1-UP; STM1-UP; EKW1-UP)
C18 MARINE GS (S/N: GBM1-UP; CYN1-UP; GEN1-UP; MGS1-UP)
C32 MAR GS ENG (S/N: RNE1-UP; RNX1-UP)
Industrial Engine:
3412E IND (S/N: BDT1-UP)
C-15 IND (S/N: BEM1-UP)
C-16 IND (S/N: BFM1-UP)
C11 INDUSTRIAL (S/N: GLS1-UP)
C13 INDUSTRIAL (S/N: LGK1-UP)
C15 IND (S/N: JRE1-UP)
C15 INDUSTRIAL (S/N: JAS1-UP)
C18 INDUSTRIAL (S/N: WJH1-UP)
C27 INDUSTRIAL (S/N: TWM1-UP)
C32 INDUSTRIAL (S/N: TLD1-UP)
C9 INDUSTRIAL (S/N: JSC1-UP; MBD1-UP)
Marine Engine:
3406E MARINE (S/N: 9WR1-UP)
C-12 MARINE (S/N: K1M1-UP; 9HP1-UP)
C12 MARINE (S/N: NFL1-UP; C1Z1-UP)
C15 MARINE (S/N: RLA1-UP)
C18 MARINE (S/N: WKB1-UP; PLE1-UP; CKH1-UP; C1J1-UP; GES1-UP; KJT1-UP; JKX1-UP)
C18 MARINE ENG (S/N: J2K1-UP; T2P1-UP)
C32 MARINE (S/N: RXB1-UP; RNC1-UP; RND1-UP; RNR1-UP; SLT1-UP; T3T1-UP; RNY1-UP; RNZ1-UP)
Excavator:
324D (S/N: EJC1-UP)
330C (S/N: CGZ1-UP)
345C (S/N: TBA1-UP; WDE1-UP; TDG1-UP; GPH1-UP; GCL1-UP; S5M1-UP; RFN1-UP; DHP1-UP; LYS1-UP; PJW1-UP)
345D (S/N: YEE1-UP; NEG1-UP; RGG1-UP; EEH1-UP; RAJ1-UP; PBT1-UP)
365C (S/N: ELC1-UP; MCS1-UP; MCY1-UP)
385C (S/N: EDA1-UP; KGB1-UP; KBC1-UP; SBE1-UP; KKK1-UP)
M322D (S/N: W2S1-UP)
Load Haul Dump:
R1600G (S/N: 9PP1-UP; 9YZ1-UP)
R1700G (S/N: 8XZ1-UP)
R2900G (S/N: JLK1-UP)
Motor Grader:
120M (S/N: B9C1-UP)
140H (S/N: CCA1-UP; APM1-UP)
143H (S/N: APN1-UP)
14H (S/N: ASE1-UP)
14M (S/N: B9J1-UP)
160H (S/N: ASD1-UP)
163H (S/N: ARL1-UP)
16H (S/N: ATS1-UP)
16M (S/N: B9H1-UP)
24M (S/N: B9K1-UP)
Off-Highway Truck/Tractor:
770 (S/N: BZZ1-UP)
772 (S/N: RLB1-UP)
Quarry Truck:
775F (S/N: DLS1-UP)
Petroleum Engine:
C-15 PETROLEUM (S/N: Z2C1-UP)
Petroleum Power Train Package:
TH35-C15I (S/N: PBN1-UP)
Petroleum Transmission:
TH35-E81 (S/N: TZM1-UP)
Road Reclaimer/Soil Stabilizer:
RM-500 (S/N: ASW1-UP)
Track-Type Tractor:
D10T (S/N: RJG1-UP)
D10T2 (S/N: RAB1-UP; JJW1-UP)
D6R Series II (S/N: AAX1-UP)
D7R Series II (S/N: AEC1-UP; ABJ1-UP; BNM1-UP; AGN1-UP)
D8R Series II (S/N: 6YZ1-UP)
D8T (S/N: J8B1-UP; KPZ1-UP)
D9T (S/N: RJS1-UP)
Underground Articulated Truck:
AD30 (S/N: DXR1-UP)
AD45B (S/N: CXM1-UP)
AD55 (S/N: DNW1-UP)
Wheel Dozer:
824H (S/N: ASX1-UP)
834H (S/N: BTX1-UP)
Wheel Loader:
962G Series II (S/N: BAB1-UP)
966G Series II (S/N: AXL1-UP; AWZ1-UP)
966H (S/N: A6D1-UP; A6G1-UP; A6J1-UP)
972H (S/N: A7D1-UP; A7G1-UP; A7J1-UP)
980G Series II (S/N: AXG1-UP; AYT1-UP)
980H (S/N: MHG1-UP; A8J1-UP; JMS1-UP)
988G (S/N: BNH1-UP; 2TW1-UP)
988H (S/N: BXY1-UP)
Wheel Tractor-Scraper:
621G (S/N: DBB1-UP; CEN1-UP)
623G (S/N: DBC1-UP)
627G (S/N: DBD1-UP)
631G (S/N: DFA1-UP)
637G (S/N: DFJ1-UP)
657G (S/N: W1B1-UP; W1C1-UP)

Introduction

Do not perform any procedure that is outlined in the Special Instruction until the entire instruction has been read and understood.

Check Valve Torque


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.

Dispose of all fluids according to local regulations and mandates.


The check valves that are located within the fuel pressure regulator group are sensitive to assembly torque. In order to eliminate the risk of valve distortion, torque the check valves to 28 ± 3 N·m (21 ± 2 lb ft). Refer to Table 1 for the check valve part numbers that required the torque that is listed above.

Table 1
Part Number     Description    
327-0376     Check Valve Gp    
327-4448     Check Valve Gp    
281-2725     Check Valve Gp    
282-1915     Check Valve Gp    
228-7381     Check Valve Gp    
327-8044     Check Valve Gp    

Caterpillar Information System:

3612 and 3616 Engines Air Shutoff
2010/11/05 A New Air Motor Lubricator Gp Is Used and A New Fitting Is Available for Service on Certain Engines {1451, 1451}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057} Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
C9.3 Tier 4 Final Engines Exhaust Diffuser Adapter
Crimputer III Setup and Operation{0684, 5057} Crimputer III Setup and Operation{0684, 5057}
C4.4 Industrial Engine Engine Oil Pressure
C4.4 Industrial Engine Engine Oil Pump - Inspect
C4.4 Industrial Engine Engine Oil Pressure - Test
C175-16 Locomotive Engine Fuel Priming Pump
C27 Generator Set Engines Electronic Control System Components
3306B Generator Set Maintenance Interval Schedule - Standby Power
3306B Generator Set Maintenance Interval Schedule - Prime Power
323F SA and 323F LN Excavator Access Door and Cover Locations
320E and 323E Excavators Engine Starting with Auxiliary Start Receptacle - If Equipped
C27 Petroleum Generator Set Engines Fuel Pressure Is High
C27 Generator Set Engines Data Link Configuration Status - Test
C27 Petroleum Generator Set Engines Speed/Timing - Test
Installing the 361-3924 Combustion Head Kit on Certain International Chassis That Are Equipped with C13 On-Highway Engines {108B, 108M} Installing the 361-3924 Combustion Head Kit on Certain International Chassis That Are Equipped with C13 On-Highway Engines {108B, 108M}
C27 Generator Set Engines Speed Control - Test
Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606} Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606}
C18 Marine Generator Set Sensors and Electrical Components - Engines Equipped with MCS Control Unit
320E and 323E Excavators Cooling System Coolant Sample (Level 1) - Obtain
Removal and Installation of High-Pressure Fuel Lines of Tier4 Interim Engines{1252, 1254, 1274} Removal and Installation of High-Pressure Fuel Lines of Tier4 Interim Engines{1252, 1254, 1274}
C7.1 Industrial Engine and Generator Set ARD Nozzle - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.