Gear Pump (Steering Oil Cooler) (Steering Pilot) - Install
安装步骤
注: 清洁度是一项重要的因素。 组装之前，应使用清洗剂彻底清洁所有零件。 让零件风干。 请勿使用抹布擦干零件。 棉绒可能会留在零件上，从而引发故障。 检查所有零件。 如果任何零件磨损或损坏，则应使用新零件进行更换。 尘土及其他污染物可能会损坏精密部件。 组装步骤应在清洁的工作面上进行。 务必盖上部件并采取适当保护措施。
注: 检查 O 形密封圈、垫片和密封件有无磨损或损坏。 如有必要，请更换部件。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 安装 O 形密封圈、齿轮泵 (2) 和螺栓 (3) 。 连接软管组件 (4) 。
Show/hide table
 | |
| 图 1 | g01431734 |
- 关闭中央门组件 (1) 。
Show/hide table
 | |
| 图 2 | g01431545 |
Caterpillar Information System:
854K Wheel Dozer Machine Systems Gear Pump (Steering Oil Cooler) (Steering Pilot) - Remove
854K Wheel Dozer Machine Systems Piston Pump (Steering) - Install
854K Wheel Dozer Machine Systems Piston Pump (Steering) - Remove
Installation Procedure for Secondary Pin Retention System on Wheel Loaders{6107, 6118} Installation Procedure for Secondary Pin Retention System on Wheel Loaders{6107, 6118}
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Main Control Valve
Procedure to Repair the Mainframe on Certain Track-Type Tractors{7050} Procedure to Repair the Mainframe on Certain Track-Type Tractors{7050}
854K Wheel Dozer Machine Systems Piston Pump (Steering) - Assemble
854K Wheel Dozer Machine Systems Piston Pump (Steering) - Disassemble
992K Wheel Loader Machine Systems Piston Pump (Implement, Center) - Install
992K Wheel Loader Machine Systems Piston Pump (Implement, Center) - Remove
854K Wheel Dozer Hydraulic System Bulldozer Trunnion
525C, 535C and 545C Wheel Skidders Hydraulic and Steering System Articulated Hitch
906, 907 and 908 Compact Wheel Loaders Power Train Front Axle Group - Remove
906, 907 and 908 Compact Wheel Loaders Power Train Front Axle Group - Install
906, 907 and 908 Compact Wheel Loaders Power Train Service and Parking Brake (Standard Axle) - Remove
Functionality for the Dual Tilt on the D9R and D9T{5104} Functionality for the Dual Tilt on the D9R and D9T{5104}
Procedure to Rework Loader Buckets for Use with Fusion Couplers {6001, 6129, 6434} Procedure to Rework Loader Buckets for Use with Fusion Couplers {6001, 6129, 6434}
992K Wheel Loader and 854K Wheel Dozer Power Train Torque Converter (Lockup)
994F Wheel Loader Power Train Fixed Axle (Front) - Remove
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Features
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0368 - FMI 02
992K Wheel Loader Electrohydraulic System Electrical System Schematic
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0590 - FMI 14
2008/01/21 A New Lubricator for the Air Starting Motor is Available {1451}