CX48-P2300 Petroleum Transmission Transmission Caterpillar


Torque Converter Housing

Usage:

CX48-P2300 GDH


图 1g03652218

表 1
269-8135 变矩器壳体总成的技术规格 
项目  数量  零件  技术规格说明 
188-0337 螺钉  装配前,在螺纹上涂抹蓝色 Loctite 242。
拧紧扭矩至 2.25 ± 0.50 N·m (19.91 ± 4.43 lb in)。 
5D-7523 O 形密封圈  用密封的润滑剂稍稍润滑孔。 
309-5133 塞组件  拧紧至扭矩为 55 ± 8 N·m (41 ± 6 lb ft)。 
5S-3676 O 形密封圈  用密封的润滑剂稍稍润滑孔。 
297-5155 垫片组  根据需要,使用以下垫片组以达到 0.10 至 0.20 mm (0.004 至 0.008 in) 的端隙: 
297-5155 垫片组有 12 块垫片。
一个垫片组的总厚度为 2.40 mm (0.094 in)
4 块垫片的垫片组中每块垫片的厚度为 0.05 mm (0.002 in)
五块垫片的垫片组中每块垫片的厚度为 0.12 mm (0.005 in)
两块垫片的垫片组中每块垫片的厚度为 0.40 mm (0.016 in)
一块垫片的垫片组中每块垫片的厚度为 0.80 mm (0.032 in)
5F-3106 O 形密封圈  用密封的润滑剂稍稍润滑孔。 
7S-3036 密封件  用密封的润滑剂稍稍润滑孔。 
194-7051 柱塞  拧紧至扭矩为 100 ± 20 N·m (74 ± 15 lb ft)。 

Caterpillar Information System:

G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Water Temperature Regulators - Install
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Monitoring System Input Components
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Water Temperature Regulators - Remove
3500C Marine Auxiliary Engines Speed Control (Switch) - Test
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Monitoring System Output Components
3500C Marine Auxiliary Engines Sensor Supply - Test
3500C Marine Auxiliary Engines Sensor Signal (PWM) - Test
3408C and 3412C Marine Engines Electric Starting Motor
C-15, C-16, and C-18 Truck Engines Electric Starting Motor
C-15, C-16, and C-18 Truck Engines Electric Starting Motor
2007/01/01 Make Sure that the Oil Shields are Installed Correctly {1100}
C6.6 Industrial Engine Maintenance Interval Schedule
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Water Pump - Remove
Diesel Particulate Filter Monitoring System {108F, 7490} Diesel Particulate Filter Monitoring System {108F, 7490}
3500B Industrial Engines Magnetic Pickups - Clean/Inspect
14L Motor Grader Machine Systems Blade - Remove and Install
TH55FT-E70 and TH55FT-E90 Petroleum Transmissions Torque Converter
C-15, C-16, and C-18 Truck Engines Electrical Ground Stud
CX35-P800 Petroleum Transmission and CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages Torque Converter Housing
CX35 On-Highway Transmission Torque Converter Housing
3512C Oil Well Service Engines Overhaul (Top End)
3500C Marine Auxiliary Engines Speed/Timing - Test
3500C Marine Auxiliary Engines Starting - Test
C4.4 Marine Generator Set Parallel Operation
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.