Water Temperature Regulators - Remove
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant from the cooling system into a suitable container for storage or disposal.
Show/hide table
Illustration 1 g01340559 - Remove bolts (3) and the retainers from elbow (1). Remove bolts (2) from elbow (1). Remove elbow (1).
- Remove bolts (5) that fasten pipe (4) to water temperature regulator housing (6).
Show/hide table
Illustration 2 g00764332 - Remove bolts (7). Remove water temperature regulator housing (6).
Show/hide table
Illustration 3 g00764347 - Remove water temperature regulators (8).
Show/hide table
Illustration 4 g00764442 - Remove seals (9), if necessary.
Caterpillar Information System:
3500C Marine Auxiliary Engines Speed Control (Switch) - Test
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Monitoring System Output Components
3500C Marine Auxiliary Engines Sensor Supply - Test
3500C Marine Auxiliary Engines Sensor Signal (PWM) - Test
3408C and 3412C Marine Engines Electric Starting Motor
C-15, C-16, and C-18 Truck Engines Electric Starting Motor
C-15, C-16, and C-18 Truck Engines Electric Starting Motor
2007/01/01 Make Sure that the Oil Shields are Installed Correctly {1100}
C6.6 Industrial Engine Maintenance Interval Schedule
3500B Industrial Engines Instrument Panel
2007/02/01 New Fuel Pressure Regulators are Now Available {1715}
2007/02/05 New Fuel Pressure Regulators are Now Available {1715}
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Monitoring System Input Components
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Water Temperature Regulators - Install
CX48-P2300 Petroleum Transmission Transmission Torque Converter Housing
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Water Pump - Remove
Diesel Particulate Filter Monitoring System {108F, 7490} Diesel Particulate Filter Monitoring System {108F, 7490}
3500B Industrial Engines Magnetic Pickups - Clean/Inspect
14L Motor Grader Machine Systems Blade - Remove and Install
TH55FT-E70 and TH55FT-E90 Petroleum Transmissions Torque Converter
C-15, C-16, and C-18 Truck Engines Electrical Ground Stud
CX35-P800 Petroleum Transmission and CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages Torque Converter Housing
CX35 On-Highway Transmission Torque Converter Housing
3512C Oil Well Service Engines Overhaul (Top End)