D10T2 Track-Type Tractor Systems Caterpillar


Idlers (Track)

Usage:

D10T2 JJW



图 1g03622540

表 1
125-3537 履带引导轮总成 的技术规格    
项目     数量     零件     技术规格说明    
-     -     -     引导轮轴的轴向间隙(端隙):
最少
0.23 mm (0.009 in)。
最多
1.29 mm (0.051 in)。    
1     2     7R-8872 O 形密封圈     用少量密封的润滑剂进行润滑。    
A     1     6Y-0473 透明塞     止动块表面以上的尺寸为
0 至 5 mm (0.0 至 0.2 in)。
组装后,螺塞不得凹陷到止动块的表面以下。    
B     1     9G-4872 橡胶止动块     橡胶止动块安装在轴末端下方的安装深度为
7 ± 7 mm (0.3 ± 0.3 in)。    
C     1     154-3308 履带引导轮轴     轴从两侧套环伸出的尺寸为
69.42 ± 0.13 mm (2.733 ± 0.005 in)。    
2     2     162-7864 Duo-Cone 密封件总成     装配时,橡胶曲面密封件必须清洁干燥。 装配时,与曲面密封件接触的所有表面必须清洁干燥。 装配时,在金属密封件的接触表面上涂抹一薄层机油油膜。 必须将密封圈装配得与孔平齐。 曲面环不得有凸起或受到扭曲。 参考专门说明书, SEHS8364, "通用 Duo-Cone 密封件的装配和安装"。    
3     24     4K-5175 螺栓     拧紧至扭矩为
135 ± 20 N·m (100 ± 15 lb ft)。    
4     2     9W-4194 衬套     装配后的孔径为
136.78 ± 0.03 mm (5.385 ± 0.001 in)。    

Caterpillar Information System:

D10T Track-Type Tractor Power Train Track Rollers
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Lift Cylinder
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Gear Pump (Implement, Pilot, Brake) - Assemble
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Gear Pump (Implement, Pilot, Brake) - Disassemble
994F Wheel Loader Steering System Gear Pump (Secondary Steering)
2005/01/10 New Bearings for the Engine Oil Pump are Available {1304}
994F Wheel Loader Hydraulic System Oil Level (Steering, Brake) - Check
994F Wheel Loader Hydraulic System Oil Filter (Hydraulic Cooler Screen) - Clean
D10T Track-Type Tractor Power Train Recoil Group
3176C and 3196 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor
988H and 988K Wheel Loaders Power Train Drive Shaft (Front) and Drive Shaft Support Bearing - Install
D10T Track-Type Tractor Power Train Equalizer Bar
3516B and 3516B HD Engines and 994D, 994F, and 994H Wheel Loaders Radiator and Cooling System - Test
D5N Track-Type Tractor Lubricant Viscosities
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Window Wiper and Wiper Motor (Front) - Install
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Window Wiper and Wiper Motor (Front) - Remove
525C, 535C and 545C Wheel Skidders Backup Alarm - Test
988H Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Remove
AD30 Underground Articulated Truck Braking System Parking Brake System Pressure - Test
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Hydraulic Accumulator (Pilot Oil)
988H Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Install
AD30 Underground Articulated Truck Fuel Shutoff Valve
3126B Industrial Engines E025 High Inlet Air Temperature Derate
988H Wheel Loader Machine Systems Lift Cylinder (Left Side) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.