Gear Pump (Implement, Pilot, Brake) - Disassemble
拆解步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件说明     | 数量     |
A     | 156-7100     | 滑锤     | 1     |
开始:
- 拆下齿轮泵。 请参考拆解和组装, "齿轮泵(机具、先导、制动器)- 拆卸"。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
注: 清洁度是一项重要的因素。 拆解步骤开始之前,应彻底清洁部件外部。 这有助于防止尘土进入内部结构。
- 拆下螺塞 (1) 。
Show/hide table
图 1 | g00735378 |
- 将机油排放到适当的容器中。
- 标记歧管 (3) 的位置以便于重新组装。
Show/hide table
图 2 | g00735384 |
- 卸下螺栓 (2) 。
- 拆下歧管 (3) 。
- 拆下 O 形密封圈 (4) 。
Show/hide table
图 3 | g00735404 |
- 标记法兰 (5) 、阀体 (6) 和阀体 (7) 以便于重新组装。
Show/hide table
图 4 | g00735407 |
- 拆下螺栓 (8) 。
Show/hide table
图 5 | g00735418 |
- 使用适当的软面锤拆卸法兰 (5) 。
Show/hide table
图 6 | g00735424 |
- 使用工具 (A) 以便拆卸唇型密封 (9) 。
Show/hide table
图 7 | g00735431 |
- 拆下 O 型密封圈 (10) 。
- 拆下 O 形密封圈 (11) 、密封 (12) 和板 (13) 。
Show/hide table
图 8 | g01141956 |
注: 拆卸之前,标记板 (13) 。 这将确保重新组装时正确就位。
- 卸下齿轮 (14) 和齿轮 (15) 。
Show/hide table
图 9 | g01141957 |
注: 标记齿轮 (14) 的位置以便于重新组装。
- 拆卸板 (16) 和隐藏式密封 (17) (未显示)。
Show/hide table
图 10 | g00735473 |
- 拆下螺母 (18) 。
Show/hide table
图 11 | g00735511 |
- 拆卸泵体 (6) 。
Show/hide table
图 12 | g00735526 |
- 拆下接头 (19) 。
Show/hide table
图 13 | g00735541 |
- 拆下螺栓 (20) 。
- 拆下盖 (21) 。
- 拆下 O 型密封圈 (22) 。
Show/hide table
图 14 | g01135959 |
- 拆卸隔板 (23) 、支承环 (24) 、密封 (25) 和挡圈 (26) 。
- 拆下板 (27) 。
Show/hide table
图 15 | g00736287 |
- 拆下 O 形密封圈 (28) 。
Show/hide table
图 16 | g01135960 |
注: 标记齿轮以便于重新组装。
- 卸下齿轮 (29) 和齿轮 (30) 。
- 拆卸挡圈 (35) 、密封 (34) 、支承环 (33) 和隔板 (32) 。
Show/hide table
图 17 | g00736454 |
- 拆下板 (31) 。
Caterpillar Information System:
994F Wheel Loader Steering System Gear Pump (Secondary Steering)
2005/01/10 New Bearings for the Engine Oil Pump are Available {1304}
994F Wheel Loader Hydraulic System Oil Level (Steering, Brake) - Check
994F Wheel Loader Hydraulic System Oil Filter (Hydraulic Cooler Screen) - Clean
D10T Track-Type Tractor Power Train Recoil Group
3176C and 3196 Engines for Caterpillar Built Machines Atmospheric Pressure Sensor
988H and 988K Wheel Loaders Power Train Drive Shaft (Front) and Drive Shaft Support Bearing - Install
D10T Track-Type Tractor Power Train Equalizer Bar
3500B Marine Propulsion Engines Sea Water Strainer - Clean/Inspect
C11 and C13 Engines for Caterpillar Built Machines Electronic Unit Injector - Install
AD45B Underground Articulated Truck Engine Air Filter Primary Element - Clean/Replace
994F Wheel Loader Hydraulic System Oil Filter (Steering Cooler Screen) (Brake Cooler Screen) - Clean
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Gear Pump (Implement, Pilot, Brake) - Assemble
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Lift Cylinder
D10T Track-Type Tractor Power Train Track Rollers
D10T2 Track-Type Tractor Systems Idlers (Track)
3516B and 3516B HD Engines and 994D, 994F, and 994H Wheel Loaders Radiator and Cooling System - Test
D5N Track-Type Tractor Lubricant Viscosities
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Window Wiper and Wiper Motor (Front) - Install
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Window Wiper and Wiper Motor (Front) - Remove
525C, 535C and 545C Wheel Skidders Backup Alarm - Test
988H Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Remove
AD30 Underground Articulated Truck Braking System Parking Brake System Pressure - Test
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Hydraulic Accumulator (Pilot Oil)