525C, 535C and 545C Wheel Skidders Caterpillar


Backup Alarm - Test

Usage:

525C 525

  • Turn the engine start switch to the ON position. Do not start the engine.

  • Move the transmission direction control switch to the REVERSE position.

  • The backup alarm should immediately sound. The backup alarm will continue to sound until the transmission control is moved to the NEUTRAL position or to the FORWARD position.


    Illustration 1g00930005

    The backup alarm is mounted on the rear of the machine.

    A three-position switch at the rear of the backup alarm regulates the sound of the alarm (HIGH, LOW, and MEDIUM).

    The alarm is set at the maximum sound level when the machine is shipped from the factory. The setting should remain on HIGH unless the job site requires a lower sound level.

  • Caterpillar Information System:

    834H Wheel Dozer and 836H Landfill Compactor Machine Systems Window Wiper and Wiper Motor (Front) - Remove
    834H Wheel Dozer and 836H Landfill Compactor Machine Systems Window Wiper and Wiper Motor (Front) - Install
    D5N Track-Type Tractor Lubricant Viscosities
    3516B and 3516B HD Engines and 994D, 994F, and 994H Wheel Loaders Radiator and Cooling System - Test
    D10T2 Track-Type Tractor Systems Idlers (Track)
    D10T Track-Type Tractor Power Train Track Rollers
    834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Lift Cylinder
    834H Wheel Dozer and 836H Landfill Compactor Machine Systems Gear Pump (Implement, Pilot, Brake) - Assemble
    834H Wheel Dozer and 836H Landfill Compactor Machine Systems Gear Pump (Implement, Pilot, Brake) - Disassemble
    994F Wheel Loader Steering System Gear Pump (Secondary Steering)
    2005/01/10 New Bearings for the Engine Oil Pump are Available {1304}
    994F Wheel Loader Hydraulic System Oil Level (Steering, Brake) - Check
    988H Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Remove
    AD30 Underground Articulated Truck Braking System Parking Brake System Pressure - Test
    259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders Hydraulic Accumulator (Pilot Oil)
    988H Wheel Loader Machine Systems Piston Pump (Hydraulic Fan) - Install
    AD30 Underground Articulated Truck Fuel Shutoff Valve
    3126B Industrial Engines E025 High Inlet Air Temperature Derate
    988H Wheel Loader Machine Systems Lift Cylinder (Left Side) - Remove and Install
    3508C, 3512C and 3516C Marine Engines Crankshaft Rear Seal and Wear Sleeve - Install
    3508C, 3512C and 3516C Marine Engines Crankshaft Front Seal and Wear Sleeve - Install
    D6R Series II Track-Type Tractor Equalizer Bar Pins - Lubricate
    D9T Track-Type Tractor Power Train Transmission - Disassemble
    3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Muffler
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.