Hydraulic Tank - Disassemble
拆解步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
B     | 138-7575     | 连杆支架     | 2     |
开始:
- 拆下液压油箱。 请参阅拆解和组装, "液压油箱 - 拆卸"。
注: 清洁度是一项重要的因素。 拆解步骤开始之前,应彻底清洁部件外部。 这有助于防止尘土进入内部结构。 污染物或污垢可能会损坏精密部件。 拆解步骤应在清洁的工作面上进行。 务必盖上部件并采取适当保护措施。
- 从断路器安全阀上拆下扣环 (1) 和盖 (2) 。
Show/hide table
图 1 | g01091821 |
- 拆下滤芯 (3) 。
Show/hide table
图 2 | g01099372 |
- 从液压油箱上拆下断路器安全阀 (4) 。
Show/hide table
图 3 | g01099373 |
- 从断路器安全阀 (4) 上拆下 O 形密封圈 (5) 、 (6) 和 (7) 。
Show/hide table
图 4 | g01099374 |
- 拆下四个螺母 (8) 、垫圈和加注口 (9) 。
Show/hide table
图 5 | g01091748 |
- 拆下盖 (13) 。
Show/hide table
图 6 | g01091750 |
- 从盖 (13) 上拆下垫片 (10) 、板 (11) 和钢球 (12) 。
- 从加注口 (9) 上拆下滤网 (14) 和 O 形密封圈 (15) 。
Show/hide table
图 7 | g01091751 |
- 松开螺栓 (16) 。 从液压油箱上拆下盖 (17) 和滤芯 (18) 。
Show/hide table
图 8 | g01092563 |
Show/hide table
图 9 | g01092556 |
- 拆下挡圈 (19) 、隔套 (20) 和六个盘簧 (21) 。
Show/hide table
图 10 | g01092557 |
- 拆下挡圈 (23) 。 拆下螺栓 (22) 。 从螺栓 (22) 上拆下 O 形密封圈。
Show/hide table
图 11 | g01092558 |
- 拆下 O 形密封圈 (24) 。
- 对其他滤清器组件重复步骤 9 至步骤 12。
- 拆下支架 (27) 。
Show/hide table
图 12 | g01091816 |
- 松开两个螺栓 (25) ,然后拆下液位表 (26) 。
- 从两个螺栓 (25) 上拆下 O 形密封圈 (28) 。
Show/hide table
图 13 | g01116310 |
- 从液位表 (26) 上拆下两个螺栓 (25) 。
- 将工具 (B) 和适当的起吊设备安装到盖 (29) 上。 盖 (29) 的重量约为 75 kg (165 lb)。
Show/hide table
图 14 | g01091753 |
- 拆下 70 个螺栓 (30) 、锁紧螺母和盖 (29) 。
- 转动盖 (29) 。
- 拆下垫片 (31) 。
Show/hide table
图 15 | g01091762 |
- 拆下垫片 (32) 。
- 拆下六个螺栓 (34) 。 从油箱组件内拆下挡板 (33) 。
- 拆下两个螺栓 (35) 。 从盖的外侧拆下滤清器座 (36) 。
Show/hide table
图 16 | g01092199 |
- 从滤清器座 (36) 上拆下两个螺柱 (37) 。
Show/hide table
图 17 | g01091771 |
- 拆下 10 个 O 形密封圈 (38) 。
- 拆下两个 O 形密封圈 (39) 。
- 小心地拆下两个螺栓 (40) 。
Show/hide table
图 18 | g01091791 |
Show/hide table
图 19 | g01091773 |
Show/hide table
弹簧加压的零件和/或盖板可能导致人身伤害。 拆卸盖板时弹簧力将被释放。 松动螺栓时做好准备把持住弹簧加载的盖板。 |
- 拆下盖 (41) 、弹簧 (43) 和阀 (42) 。
- 从盖 (41) 上拆下 O 形密封圈。
- 拆下两个锁紧螺母 (45) 和挡板管 (44) .
Show/hide table
图 20 | g01091792 |
- 拆下两个锁紧螺母 (46) 、垫圈和排放阀组件 (47) 。
Show/hide table
图 21 | g01091805 |
- 拆下螺塞 (48) 。 从螺塞 (48) 拆下 O 形密封圈 (49) 。
Show/hide table
图 22 | g01091806 |
- 从排放阀阀体 (47) 上拆下 O 形密封圈 (50) 、阀 (51) 、弹簧 (52) 和阀导管 (53) 。
- 拆下 4 个螺栓 (55) 和盖 (56) 。
Show/hide table
图 23 | g01091807 |
- 拆下两个螺栓 (54) 。
- 拆下垫块 (57) 。
Show/hide table
图 24 | g01091808 |
- 从垫块 (57) 上拆下 12 个 O 形密封圈 (58) 。
Show/hide table
图 25 | g01091810 |
- 从液压油箱上拆下四个螺栓 (60) 和盖 (61) 。
Show/hide table
图 26 | g01091812 |
- 拆下两个螺栓 (59) 。
- 拆下垫块 (62) 。
Show/hide table
图 27 | g01091813 |
- 拆下七个 O 形密封圈 (63) 。
- 拆下 4 个螺栓 (64) 和盖 (65) 。
Show/hide table
图 28 | g01091811 |
- 拆下两个螺栓 (66) 。
- 拆下垫块 (67) 。
Show/hide table
图 29 | g01091815 |
- 拆下七个 O 形密封圈 (68) 。
Caterpillar Information System:
R1300G Load Haul Dump Machine Systems Vane Pump (Implement, Steering, Pilot and Braking) - Install
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Gear Pump (Steering) - Assemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Radiator Core - Clean
446D Backhoe Loader Machine Systems Bucket - Remove and Install
797 Off-Highway Truck Front Axle Breather - Replace
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector
C15 Petroleum Generator Set Engines Fuel Transfer Pump
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Gear Pump (Steering) - Disassemble
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Gear Pump (Steering) - Install
252-9310 Parking Brake Control Gp (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump{1408, 4250} 252-9310 Parking Brake Control Gp (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump{1408, 4250}
R2900G Load Haul Dump Machine Systems Diverter Valve (Secondary Steering) - Install
R1300G Load Haul Dump Machine Systems Vane Pump (Implement, Steering, Pilot and Braking) - Remove
R1600G Load Haul Dump Machine Systems Vane Pump (Implement, Steering, Pilot and Braking) - Disassemble
R1300G Load Haul Dump Machine Systems Neutralizer Valve (STIC Steering) - Remove and Install
R1300G Load Haul Dump Machine Systems Neutralizer Valve (Implement and Steering) - Remove and Install
725 and 730 Articulated Trucks Machine Systems Steering System Troubleshooting
R1300G Load Haul Dump Machine Systems Pilot Valve (STIC Steering) - Remove
R1600G Load Haul Dump Machine Systems Hydraulic Tank - Assemble
725 and 730 Articulated Trucks Machine Systems Hoist System Troubleshooting
725 and 730 Articulated Trucks Machine Systems Piston Pump (Steering, Hoist) - Test and Adjust
725 and 730 Articulated Trucks Machine Systems Piston Pump (Brake, Hoist, Fan) - Test and Adjust
725 and 730 Articulated Trucks Machine Systems Electric Drive Pump (Secondary Steering) - Check
725 and 730 Articulated Trucks Machine Systems Service Brake Air - Purge
834H Wheel Dozer and 836H Landfill Compactor Axle Oil Cooler Filter - Replace - If Equipped