Fuel Transfer Pump
Show/hide table
| |
| 图 1 | g02543779 |
|
(1) 溢流孔
(2) 压力调节阀 (3) 进口 (4) 出口 | |
Show/hide table
| 316-6864 输油泵总成、 316-6863 输油泵总成、 295-9260 输油泵总成、 295-9261 输油泵总成、 272-5930 输油泵总成、 316-6865 输油泵总成和 290-8866 输油泵和注油泵总成的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| - | - | - | 当燃油输油泵使用柴油时，燃油输油泵具有以下技术规格： |
| 使泵在 2940 rpm 转速下运转。 整个旁通压力应为 |
|||
| 使泵在 840 rpm 转速下运转。 在 |
|||
| 使泵在 2940 rpm 转速下运转。 在 |
|||
| 使泵在120 rpm 转速下运转。 保持进口对空气打开 10 秒钟。 封闭进口。 泵必须能保持 |
|||
| 使泵在 840 rpm 转速下运转。 保持进口对空气打开 10 秒钟。 封闭进口。 泵必须能保持 |
|||
| 封闭进口让泵在 120 rpm 转速下运转 30 秒钟。 泵的进口必须具备最小为 |
|||
Caterpillar Information System:
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Gear Pump (Steering) - Disassemble
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Gear Pump (Steering) - Install
252-9310 Parking Brake Control Gp (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump{1408, 4250} 252-9310 Parking Brake Control Gp (Automatic) Custom Product Support Literature for the R1300G Load Haul Dump{1408, 4250}
R2900G Load Haul Dump Machine Systems Diverter Valve (Secondary Steering) - Install
R1300G Load Haul Dump Machine Systems Vane Pump (Implement, Steering, Pilot and Braking) - Remove
C15 and C18 Industrial Engines Flywheel Housing - Remove and Install
Bench Test Procedure for a 776 and 777 Off-Highway Truck Transmission {3030, 3073} Bench Test Procedure for a 776 and 777 Off-Highway Truck Transmission {3030, 3073}
446D Backhoe Loader Machine Systems Pilot Valve (Stabilizer) - Assemble
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Vibratory Valve - Disassemble
3500 Industrial Engines Auxiliary Water Pump
446D Backhoe Loader Machine Systems Pilot Valve (Stabilizer) - Disassemble
3508 EUI Engine for Off-Highway Truck/Tractors Water Pump
C13, C15, and C18 Tier 4 Final Engines Electronic Unit Injector
797 Off-Highway Truck Front Axle Breather - Replace
446D Backhoe Loader Machine Systems Bucket - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Radiator Core - Clean
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Gear Pump (Steering) - Assemble
R1300G Load Haul Dump Machine Systems Vane Pump (Implement, Steering, Pilot and Braking) - Install
R1600G Load Haul Dump Machine Systems Hydraulic Tank - Disassemble
R1600G Load Haul Dump Machine Systems Vane Pump (Implement, Steering, Pilot and Braking) - Disassemble
R1300G Load Haul Dump Machine Systems Neutralizer Valve (STIC Steering) - Remove and Install
R1300G Load Haul Dump Machine Systems Neutralizer Valve (Implement and Steering) - Remove and Install
725 and 730 Articulated Trucks Machine Systems Steering System Troubleshooting
R1300G Load Haul Dump Machine Systems Pilot Valve (STIC Steering) - Remove